Tulsa Gas Technologies India Private Limited

#High Hose Stand Alone CNG Dispenser [P7202-6 CNG50-S]

#Single High Hose Stand Alone CNG Dispenser [P7103-12-CNG50-S]

#High Hose Stand Alone CNG Dispenser [P7203-8CNG50-S ]

#High Hose Stand Alone car/Bus CNG Dispenser [P7203-8/12 CNG50-S]

This dispenser prover is designed to eliminate the need to use a calibrated scale and a loose high pressure CNG vessel when caring out a field accuracy and calibration test. Field testing can now use the flow-through method which makes the process safer than using scales. You will no longer have to discharge the calibrated gas to a safe area or have to deal with unstrapped high pressure vessels. We have super calibrated a Micro Motion CNG50 mass flow meter to specs needed to prove the accuracy of a CNG dispenser, then we packaged it so it is transportable to the CNG station and not require any outside power supply.

The cooled and filtered gas – called pressure – is sent to another compressor, which is a hydraulic compressor, usually called Booster. It allows to take gas pressure from an average of 100/120 bar, up to 250 bar, in order to create a high-pressure line, the main characteristic of a hydraulic compressor is the low power of its engine, this allows to have a very slow charge phase and the gas is not heated. Moreover, such a unit needs less maintenance than other compressors.

Synflex Hoses

Fill Post