TIW Corporation

Liner Hanger Systems

Liner Hanger Systems

Completion Packers

Completion Packers

Safety & Kelly Valves

Safety & Kelly Valves

Window Cutting Products

Window Cutting Products

Specialty Service Tools

Specialty Service Tools

XPak™ Expandable Liner Hanger System

XPak™ Expandable Liner Hanger System

<p>The TIW XPak&trade; Expandable Liner Hanger System is designed to run with standard liner applications and incorporates industry-proven expandable technology to provide a liner top anchor/sealing device unmatched in the industry. The TIW XPak&trade; system is used anywhere a robust liner top seal is needed or where a slimhole design is required to mitigate ECD issues. The TIW system has been used on land and offshore around the world from the U.S. and Canada to the Middle East and North Sea.</p> <p>Benefits</p> <ul> <li>High torque capabilities for rotation and/or drill down operations</li> <li>Manufactured from standard OCTG material</li> <li>High pressure integrity equal to casing design</li> <li>High load capability with ability to support long liners</li> </ul> <p>Applications</p> <ul> <li>Deepwater</li> <li>Drilling with liner</li> <li>Extended Reach</li> <li>HP/HT</li> <li>Lost Circulation</li> <li>Wash/Ream</li> <li>Multi-Stage Cementing</li> <li>Multi-Stage Fracturing</li> </ul> <p>Source :&nbsp;https://www.tiwoiltools.com/xpak-liner-hanger.html</p>

EJ-IB-TC Mechanical Set Liner Hanger

EJ-IB-TC Mechanical Set Liner Hanger

<div> <p>The TIW&reg; EJ-IB-TC Liner Hanger has an integral barrel with no internal thread connections for maximum pressure integrity. It is used to suspend a cemented or an uncemented liner off bottom. The EJ-IB-TC Liner Hanger has a staggered slip alignment which allows extra bypass and additional hanging capacity. The added bypass lessens pressure build-up during run-in and cementing, reducing the chance of damaging the pressure sensitive formations.</p> <h4>Features</h4> <ul> <li>Limited travel on slips</li> <li>Integral barrel provides maximum pressure integrity</li> <li>Staggered slip alignment allows extra bypass and additional hanging capacity</li> <li>Available with either right-hand or left-hand jay</li> </ul> <p>Source :&nbsp;https://www.tiwoiltools.com/ej-ib-tc-mechanical-hanger.html</p> </div>

IB-TC-R Hydraulic Set Liner Hanger

IB-TC-R Hydraulic Set Liner Hanger

<p>The TIW&reg; IB-TC-R-RRP Hydro Hanger has an integral barrel for pressure integrity with special channels milled in the slip cones that provide maximum bypass for easier running. This feature combined with a patented twin seal journal bearing is designed specially to accommodate the rotation of liners and to improve displacement efficiency and cement bonding even in tight, eccentric holes. Shear pinned to prevent premature setting, the IB-TC-R-RRP Hydro Hanger is set by seating a ball in the PDC HS-SR Landing Collar and applying pressure through the setting string.</p> <p>Features</p> <ul> <li>Integral body eliminates all internal connections above lower nipple</li> <li>Staggered slip design provides maximum bypass in set position</li> <li>Accommodates the rotation of liners</li> <li>Improves displacement efficiency and cement bonding</li> </ul> <p>Source :&nbsp;https://www.tiwoiltools.com/ib-tc-r-hydraulic-set-liner-hanger.html</p>

IB-DD Hydraulic Set Liner Hanger

IB-DD Hydraulic Set Liner Hanger

<div> <p>The TIW&reg; IB-DD Hydro Hanger is an &ldquo;Integral Barrel Drill Down&rdquo; design, providing the operator the ability to rotate and/or reciprocate the liner to bottom without fear of premature setting of the hanger slips. Available in both single and tandem cone versions, the single cone design allows for maximum bypass for circulating while maintaining the ability to hang short to medium length liners. The tandem cone design allows for even greater bypass areas and is capable of hanging medium to long liners.</p> <p>Features</p> <ul> <li>Enclosed piston, setting sleeve and slip spring arrangement that prevent drillout debris from settling in and around them thus preventing a possible hanger failure</li> <li>The streamlined design also features slips that are enclosed in a pocket and locked into place</li> <li>With the protected slips, slip springs and setting sleeve, the hanger can enter sub-sea well head stacks and existing liner tops with great ease</li> <li>Can be rotated at high revolutions without the possibility of components being detached or the hanger prematurely setting</li> </ul> <p>Source :&nbsp;https://www.tiwoiltools.com/ib-dd-hydraulic-set-liner-hanger.html</p> </div>

LS-15™ Liner Hanger Systems

LS-15™ Liner Hanger Systems

<p>The LS-15 Liner Hanger System has been purpose-built for true drill-down applications. Operators in many areas of the world experience considerable difficulty with wellbore stability that may cause hole problems. The LS-15 Liner Hanger System is capable of accommodating, depending on the size requested, from 20,000 to 160,000 ft-lb of rotational torque through the tool, enabling the operator to rigorously &ldquo;drill&rdquo; the liner into the hole.</p> <p>Features</p> <ul> <li>High-strength, high-pressure, high load carrying capacity</li> <li>Metal-to-metal Annulus Packer Seal for high- pressure service</li> <li>No hydraulic or mechanical devices on the hanger body, minimizing leak paths</li> <li>Large slip area and controlled friction minimizes stress in the supporting casing</li> <li>All hangers are automatically centralized when C-Ring Slip is set</li> <li>Bypass flow area is the same after setting the liner hanger slip as in the running-in position</li> <li>Maximizes circulating flow-by areas for efficient cementing operations</li> <li>The LS-15 Liner Hanger System can be sized and configured to customer specifications</li> </ul> <p>Source :&nbsp;https://www.tiwoiltools.com/ls-15.html</p>