Conformable, self-amalgamating tape based on polyisobutylene (PIB). The tape is interleaved with an easy to remove plastic film. Non tacky and easy to handle and apply. Model 14003/PIB is highly resistant to prolonged immersion in water and have excellent resistance to ozone. Compatible with epoxy and acrylic resin systems. 2501 and 2504 will remove cleanly from most surfaces when cut, allowing them to be used as a temporary insulation/protection. They have a "locking point", i.e. they become more difficult to stretch at very high elongations, preventing overstretching or breaking during application. The tapes are not resistant to petroleum type solvents. They should not be used in contact with transformer oils or the oils used in paper cable impregnates as these will cause softening of the tapes.

In combination with RACI’s HDPE spacers, as anti-slid tape: in case of plastic carrier pipe (PVC, PE and similar) or 3ply PE coated steel pipe, it is suggested to apply this tape on the contact area between the ring and the carrier pipe, in order to avoid any horizontal sliding of the rings on the carrier pipe during the inserting operations. For protection against corrosion on, for example, metal pipe-work (particularly at welds or joins) and waterproofing of many electrical components. For jointing (splicing) and repair of a wide range of power and distribution cables up to 42 kV. Model 14003/PIB is used on a large scale by Postal and Telephone Authorities in conjunction with PVC tape (model 14004) for making watertight seals at polyethylene sleeve joints on polyethylene-sleeved telephone cables, both above and below ground The electrical properties show a high degree of stability under conditions of use. The tapes amalgamate rapidly when applied under tension (as described in 'Application' Section) to provide a void-free homogenous wrapping, without the need for external heat or pressure. They are compatible with a wide range of rubber and plastic dielectrical cable insulation. These include polyethylene, cross-linked polyethylene, ethylene propylene rubber, PVC, butyl, neoprene and many others.

Raci Spacers India Private Limited

Raci India was established in 2009 as a subsidiary of Raci SRL Italy to provide quality engineering solutions for the installation of oil and gas pipelines. Due to the sheer market's proximity to India, we began servicing the Middle East market in 2011.
In 2018, Flowheel FZE, the Middle East arm of RACI Pipeline Division of Raci SRL, Italy, began operations from Ras Al Khaimah Free Zone in the United Arab Emirates.
RACI has a significant presence in Iraq, Kuwait, Saudi Arabia, the UAE, Qatar, Bahrain, and Oman.
We work in both the water and oil and gas industries. Since 2018, Flowheel has been expanding its RACI business by entering into new partnerships and carving out a niche in the market from its Middle Eastern base.
In 2020, Flowheel and RACI India collaborated with Radlinger Primus Line Gmbh, Germany, to provide trenchless rehabilitation of underground pipelines in critical installations.