" Industry : Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension; clean or dirty low viscosity petroleum product or solvents; milk of lime, caustic soda; washing, cooling, circulation; smoke scrubbing; emergency duty. "

Special Features

• Excellent quick automatic action without foot valve up to 8 mtrs.
• Auto suction lift upto 18 feet.
• Automatic air release during priming.
• Back pull out design, so easy maintainance without disturbing pipe lines.
• Dynamically balanced rotating parts ensure less vibrations.
• Better efficiency because of good hydraulic design.
• Minimum parts, fast repairing at low cost, Also pump is available at economical rate.
• Available in Bare, Coupled, Monobloc, Belt driven version.
• Also offered pump with trolley / trailer to move it from one place to another.
• Less expensive & easily available spares.
• Available in gland & mechanical seal as per customer's requirements.
• simple construction, only two moving parts.
• Easy inspection of impeller.
• Large diameter of solids handled . up to 50 mm.
• High resistance. to abrasive liquids the wear plate is easily replaced and impeller are also available in s.s. Alloy 20, Polypropeline etc
• Easy to install :- only the suction hose is immersed in the liquid, The pump can be set up high and dry in the most convenient position for inspection and maintenance.
• Long Life :- The parts subject to wear can be easily replaced one or more times to restore the original performance.

Application

• Public utilities :- For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.
• Dewatering Basements, Trenches, Construction sites.
• Onboard shift, as bildge, for desk wash & engine cooling.
• Tiles & Marble factories, effluent plants.
• Mobile Machinery : Cooling water for marine engines and shovels.
• Any application where priming is to be avoided.
• Industry : Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension; clean or dirty low viscosity petroleum product or solvents; milk of lime, caustic soda; washing, cooling, circulation; smoke scrubbing; emergency duty.
• Civil engineering : Flood drainage; sewage pumping; fire fighting; recovery of dangerous liquids.
• Naval duty :- Loading and unloading; bilge pumping; washing, fire fighting, stripping, sanitary duty and circulation.
• Waste treatment : Pumping polluted, hot or corrosive waster water containing sand, mud or solids in suspension; dosing neutralising liquids; pumping out settled sludge.
• Construction industry : Dewatering excavation, canals or ponds; ground water dewatering with wellpoint system or drains; water supply from wells or canals; hosing down concrete castings.
• Agriculture : Surface irrigation; liquid manure oxygenation; transfer and spraying liquid manure or fertilisers, distribution of liquid animal feed; transfer of must; washing.

Typical Application

• Liquid containing sand mud or solids in suspension with pH from 5-13, smoke scrubbing; water emulsion for machine tools or grinders, cutting or quenching fluid circulation, cooling water circulation in steel mills or drawing mills; neutralising liquid dosage, pumping out settled sludge, sump pumping liquid manure transfer and circilation
• Water circulation in paint spray booths; stripping fuel tanks circulation
• Recovery of dirty solvents
• Transfer of light petroleum product such as diesel fuel, paraffin, kerosene and petrol (gasoline)
• Liquid fertiliser transfer, circulation and spraying, brackish or sea water containing sand
• Brackish or sea water washing, cooling or fire fighting in ports; auxiliary duties on board
• Marine duty; brine, sea intake and circulation of sea water in swimming pools
• Pumping out acid waster, transfer, of dilute acids; fruit juice or fluid food products
• Recovery of spills from chemical plant; transfer or circulation of caustic soda or potash
• At Drilling Rigs

Material Of Construction

Material Of Construction

• CASING : CAST IRON / SS-304 (CF-8) SS-316 (CF-8M)
• IMPELLER : CAST IRON / CF-8 / CF-8M / BRONZE
• DIFFUSER : CAST IRON / CF-8 CF-8M /BRONZE S
• SHAFT : EN-8 / SS-304 / SS -316
• SLEEVE : SS-410 / SS-304 / SS-316 / BRONZE
• BEARING HOUSING : CAST IRON
• SEALING : TIWA /CARBON - CERAMIC SEAL / TC-TC SEAL

Source :- http://www.plastopumps.com/mud+pumps.html

Plasto Pumps & Valves

Plasto Pumps & Valves was established in 2001 by promoters having over a decade experience in the pump industry. During our early stage of working with the pump industry and specially in the Chemical pump section ,we found that the main problem faced by the user of Chemical pumps was leakage from the seal and maintenance & breakdown occurring frequently due to it. To resolve the above main problem of the pump user, we found that Seal-less pumps with Magnetic drive technology was the perfect solution. Hence we started our production of Seal-less Magnetic Drive pumps under the brand name of Plasto.