Hebei Solidkey Petroleum Machinery Co., Ltd.

Matrix body PDC bits have better wear resistance than steel body PDC bits, they are  suitable for very deep well drilling, especially for the horizontal directional drilling section that depth exceeds 2500 meters.

As the development of hard-facing technology, steel body PDC bits become to be higher wear resistance, steel body PDC bits are used more and more by its higher ROP, safer drilling and lower cost. But in very deep horizontal directional drilling section, matrix body PDC bits still have advantage of longer working life to avoid bit replacement.

Source:- http://en.skbit.com/product/234.html

12 1/4"(311.1mm) IADC637 Conical Inserts TCI Tricone Drill Rock Bits

Solidkey Petroleum Machinery is one of the leading suppliers of drilling rock bits for oil, gas, water well drilling, construction, foundation, geological exploration located in China.

Solidkey has confidence to supply world-wide market with sharp quality tricone drill rock bits, the tricone bits, PDC bits, reamers, foundation roller cones has been working in more than 35 countries in the past 10 years. Product quality, optimized solution and warm service have been our superiorities.

Quality of products is the life-line of Solidkey and that’s the reason we perfect the quality control system continuously. All of the production processes are ruled by API Spec 7 and ISO9001. 

Better solution is our working feature, we will provide the suitable solution according to drilling fields(vertical well drilling or horizontal well drilling, oil well drilling or No-Dig drilling or foundation piling), hardness of rocks, types of drill rigs, etc. Our aim is to lower the cost of drilling per meter.

Products Speification :- 

• Cone Size  -  12 1/4Inch
• Bearing Type  -  Elastomer Sealed Bearing
• Tooth Type  -  TCI
• Circulation  Type  -  Mud Fluid
• Thread Connection  -  6 5/8 Reg Pin
• Gauge Protection  -  Available
• Shirttail Protection  -  Available

Operating Parameters :-

• RPM (r/min)  -  80~40
• WOB(KN)  -  156~373
• Application  -  Hard formation with high compressive strength ,such as sandstone,dolomite,hard shale,hard gypsum,chert, granite, etc.

Source :- http://en.skbit.com/product/173.html

5 7/8" is the passing through diameter, 7 1/2" is the reaming diameter, 4 3/4" is the diameter of front bit.

We can produce both matrix body and steel body BI center bit, the cutters could be diameter 8mm, 13mm, 16mm, 19mm, blades quantity ranges from 3 to 8.

Order procedure :

1>Confirm 3D design.

2>Trial order.

3>Testing and improvment.

4>Mass production.

If the requirement is regular, we have mature design according to various of drilling conditions.

Source:- http://en.skbit.com/product/428.html

This is a spiral blades PDC hole opener, upper is 6 5/8 API reg box, bottom is 4 1/2 API reg box, drillers could fit PDC bits or motor applicable tricone bits in front.

The long PDC blades performs like a near-bit stabilizer and a reamer that keeps hole at straight trail and reams well-wall smoothly.

Solidkey also produces PDC hole opener for HDD/No-Dig application, please contact us to get more information.

Source:- http://en.skbit.com/product/360.html

17 1/2"(444.5mm) Steel Tooth Tricone Bit For Soft Formation Drilling

Steel tooth tricone bits are also named milled tooth tricone bit, "steel" means the teeth material is steel, actually it is a type of special steels 15MnNi4Mo and the surface of steel material is hard faced by Tungsten Carbide to increase wear resistance.

Milled means the teeth is machined by milling machine, so steel tooth tricone bits have another names "mill tooth tricone bits" or "milled tooth tricone bits". 

17 1/2 inches is always diameter of the first hole in deep well drilling, the formations are always soft in shallow section, so 17 1/2" is widely used in worldwide.

Products Speification :-

• Cone Size  -  17 1/2Inch
• Bearing Type  -  Elastomer Sealed Bearing
• Tooth Type  -  Steel /Milled
• Circulation  Type  -  Mud Fluid
• Thread Connection  -  7 5/8 Reg Pin
• Gauge Protection  -  Available
• Shirttail Protection  -  Available

Operating Parameters :-

• RPM (r/min)  -  150~60
• WOB(KN)  -  156~423
• Application  -  Medium formation with high compressive strength ,such as medium soft shale,medium soft limestone,medium soft sandstone, medium formation with harder and abrasive interbeds,etc.

Source :- http://en.skbit.com/product/270.html

14 3/4" (374.7mm) IADC537 API TCI Tricone Rock Roller Bits For Well Drilling

1. Cutting Structure

The teeth or inserts, mill tooth tricone bits must be hard-faced by tungsten carbide coating, the inserts must be high grade tungsten carbide.

The life of rock roller bits mainly depends on both teeth/inserts life and bearing life.

2. Gauge Structure

Optimized gauge protection design could keep the diameter fixed from top to bottom of hole to avoid shrinkage.

3. Bearing Structure

IADC537, the 3rd number 7 means journal sealed bearing with gauge protection on heel of cones.

4.Seal and Lubrication

Sealed bearing and lubrication of bearing is very important for life of rock roller bits, grease compensation system inside arms and cones lubricate bearing by a steady flow of high grade specific grease for rock roller bit only.

Products Speification :-

• Cone Size  -  14 3/4Inch
• Bearing Type  -  Elastomer Sealed Bearing
• Tooth Type  -  TCI
• Circulation  Type  -  Mud Fluid
• Thread Connection  -  7 5/8 Reg Pin
• Gauge Protection  -  Available
• Shirttail Protection  -  Available

Operating Parameters :-

• RPM (r/min)  -  120~50
• WOB(KN)  -  168~374
• Application  -  Medium formations,such as medium shale, limestone, medium sandstone, medium formation with harder and abrasive interbeds, etc.

Source :- http://en.skbit.com/product/424.html

16"(406mm) IADC517 Tricone Drill Bits Following API Spec 7 Standard

Solidkey tricone drill bits has been served for more than 35 countries in the past 10 years, the customers includes drilling contractors, distributors, government tenders.

For drilling contractors, Solidkey tricone drill bits and PDC bits could be customized to work with the costly rigs and equipment which will increase drilling efficiency, reduce consuming and save drilling cost.

For distributors of drilling tools, specific supplying strategy for specific requirement will be made before supplying, detailed communication before-sale makes no worry about after-sale service. Adequate inventory and prompt production speed supports fast delivery, producing strictly in lines of API rules brings long time cooperation with each customers.

Products Speification :-

• Cone Size  -  16 inch
• Bearing Type  -  Elastomer Sealed Bearing
• Tooth Type  -  TCI
• Circulation  Type  -  Mud Fluid
• Thread Connection  -  7 5/8 Reg Pin
• Gauge Protection  -  Available
• Shirttail Protection  -  Available

Operating Parameters :-

• RPM (r/min)  -  140~60
• WOB(KN)  -  142~406
• Application  -  Soft to medium formation with low
  compressive strength, such as mudstone,
  gypsum, salt,soft limestone,etc.

Source :- http://en.skbit.com/product/404.html

4 3/4 Inches Steel Teeth Exploration Tricone Drill Bit IADC126

4 3/4" is always used in exploration, water well drilling and cement plug drilling, it has a central flush hole for mud fluid circulation, the bearing is sealed and thread connection is produced in rules of API 2 7/8 reg pin.

The teeth are hard-faced by tungsten carbide, teeth life is very long in drilling mudstone and soft rocks.

Products Speification :-

• Cone Size  -  4 3/4 Inch
• Bearing Type  -  Elastomer Sealed Bearing
• Tooth Type  -  Steel/Milled
• Circulation  Type  -  Mud Fluid
• Thread Connection  -  2 7/8 Reg Pin
• Gauge Protection  -  Unavailable
• Shirttail Protection  -  Unavailable

Operating Parameters :-

• RPM (r/min)  -  180~60
• WOB(KN)  -  36~102
• Application  -  Medium formations,such as medium shale,
  limestone, medium sandstone,medium
  formation with harder and abrasive interbeds,
  etc.

Source :- http://en.skbit.com/product/410.html

9 7/8 Inches Steel Tooth Tricone Bit IADC127 for Drilling Soft Formations

Advantage of steel tooth tricone bit:

• Higher penetration rate. The longer teeth has faster drilling down speed.
• Anti-balling. The sticky rocks always make bit-balling, steel tooth tricone bit is suitable for drilling soft formations and sticky rocks.
• IADC127 has tungsten carbide inserts on gauge of cones, this feature is well to avoid diameter-shrinkage.

Products Speification :-

• Cone Size  -  9 7/8 Inch
• Bearing Type  -  Elastomer Sealed Bearing
• Tooth Type  -  Steel/Milled
• Circulation Type  -  Mud Fluid
• Thread Connection  -  6 5/8 Reg Pin
• Gauge Protection  -  Unavailable
• Shirttail Protection  -  Unavailable

Operating Parameters :-

• RPM (r/min)  -  150~60
• WOB(KN)  -  75~213
• Application  -  Medium formation with high compressive
  strength ,such as medium soft shale,medium
  soft limestone,medium soft sandstone,
  medium formation with harder and abrasive
  interbeds,etc.

Source :- http://en.skbit.com/product/407.html

How to design:

1>We can design according to geological information of your drilling field

 2>Clients provides real samples or drawings, we can produce according to samples or drawings.

Source;- http://en.skbit.com/product/427.html 

Reverse circulation is a type of drilling technology, the mud fluid inside drill pipe goes from bottom to ground, big size rock chips could be sucked away from hole bottom to avoid breaking repeatly, so the drilling speed is much faster and high efficiency.

Source-: http://en.skbit.com/product/429.html

Polycrystalline Diamond Compact Bit is always named PDC bit, it is a type of diamond bits widely used in oil/gas well drilling, it has much longer working life than tricone bit, and the steerable feature is very good in horizontal directional drilling .

Polycrystalline Diamond Compact Bit has amazing performance in drilling steady rocks, one PDC bit could even drill a hole from ground to 2000 meters bottom directly without changing new bit.

Advantage of Steel Body Polycrystalline Diamond Compact Bit:

1> As the developing of hard-facing technology, steel body PDC bit has same wear resistance with matrix body.

2> The steel body is produced from one forging steel, the drilling risk is much lower than matrix body.

3> Steel body could be designed and produced in very sharp style, the ROP(Rate of Penetration) is much higher than matrix body PDC bit.

4> Steel body is much cheaper than matrix body.

Source:- http://en.skbit.com/product/426.html