Geo Tec International Pvt Ltd - Energy Dais | Oil and Gas Directory

Claimed🛈

Based and active in India since 1997, Geo Tec combines Oil and Gas industry-specific managerial consulting competence with extensive technology and practice know how.

Consequently, we are able to advise our clients throughout the entire process chain, from market analysis, strategic development to process optimization. Geo Tec takes entrepreneurial initiative when it identifies unsatisfied market demand and new business opportunities. The Key Consulting Competencies prevalent to Geo Tec are in fields of Corporate Strategy, Business and Market Intelligence, Product and Price positioning and in depth knowledge of tender processing in India. With that breadth of knowledge, we see things that matter most. Insights that can transform your world.

Our Technology teams take an intense industry focus working with business leaders to solve their toughest challenges through applied innovation – backed by worldwide resources, deep strategic alliances, and full-spectrum delivery across strategy, implementation, management and operations. The result? Technology’s promise fulfilled.

As a focused Oil and broader Energy consultancy, Geo Tec International Pvt Ltd with its in-depth knowledge of the global energy markets and developments delivers independent strategic consultancy, key market analysis, executive briefing to enhance efficiency, productivity and sustainability

⌖ 3245, Ranjit Nagar, South Patel Nagar, New Delhi, India
✉ gsharma@geotec.in

Year of incorporation
1997

Revenue
1m - 5m USD

Number of Employees
50 to 100

📞 Contact ﹀ 📞 Contact ︿

🌎 Website ﹀ 🌎 Website ︿

http://www.geotec.in

↗ Share ﹀ ↗ Share ︿

About.pdf

+ Location − Location

503 Tower 1 Star Hub

International Airport Road Sahar Andheri East

Mumbai, Maharashtra,

400059, India

Ph: +91 2261278380

No. 12, Kanakdara Nagar, II Floor,

First Main Road, Ajay Street, Valasravakkam

Chennai, Tamil Nadu,

600087, India

Ph: +91 4424766080

Overseas Office

679, Merill Drive Ne Calgary

Calgary, Alberta,

T2E8Y5, Canada

Ph: +1 9056546282

Pipli Complex

Boarding Road

Sibsagar, Assam,

785640, India

Ph: +91 3772224896

3245 Ranjit Nagar

South Patel Nagar

New Delhi, Delhi,

110008, India

+ Products & Service − Products & Service

Mustang 650hd/112-350

Show Details ︿ Show Less﹀

Mustang 650hd/112-350

Patent No. US 7,210,670 B2 Mustang double-drum drawworks with self-energized band type brakes with Indutex blocks and Howell bands, 46 x 10 main drum assembly, RWI hard overlay rims, 21¼-inch O.S. main drum spool diameter with Lebus grooving for 1-inch line, drum assembly, dynamic balanced, Twin Disc P.O. 324 clutch with 52,000# single line pull, 46 x 08 sandline drum assembly, with 14-inch barrel, Twin Disc P.O. 124 clutch, 16,500’ capacity, Drive chains, Martin Sprockets, open loop splash water cooling, central lubrication. Draw works brake components are manufactured in accordance with API License # 7K-0312.

Rig Works warrants to Buyer for new Rigs that the carrier, Mast and Drawworks are built in a good and workmanlike manner and shall be free of defects in material and labor for 12 months beginning with the in-service-date. The term “Equipment” herein refers to the new Rig and all components thereof. Rig Works’ obligations under this warranty is limited to repairing or replacing any defective part.

1300 H.p. Land Rig

Show Details ︿ Show Less﹀

1300 H.p. Land Rig

specifications:-

RG Model JC28B, max speed 450 rpm – API spec 7K
Rated @ 1300 HP
Fast line pull 62,107 lbs
Diameter: 40 inch x 25 inches
ATD 330H axial thrust disc clutch (New from WPT 2 Qtr. 2013).
Drawworks fitted with disc brakes – 14,330 lbs positive pressure per rim
Disc brakes have separate hydraulic system
Eaton model 324 auxiliary brake – water cool – separate tankage
7,500 ft 1-1/4” drill line 6x19 EIPS IWRC RRL
Crown-O-Matic toggle valve crown saver

Dtd-550pb-118-300

Show Details ︿ Show Less﹀

Dtd-550pb-118-300

Specifications:-

Self-propelled, back-in carrier
Driller’s side and off-driller’s side folding walkways and handrails
Highway lighting package
Three front non-drive steering axles with rear wheel drive tandem axles, and one non-drive pusher/tag axle
All axles to be equipped with air braking system
Caterpillar C15 540 hp ACERT diesel engine
Allison Model 5610 Series
One 5,000 lb air winch mounted on rig floor
One 12,000 lb hydraulic winch mounted on carrier deck
Two tool boxes, one mounted on the underside of the carrier frame and one on the deck

1500-Ac Drilling Rig

Show Details ︿ Show Less﹀

1500-Ac Drilling Rig

Features:-

Poerered by: (1) LTI 1500HP continous duty AC motor
Emergency/Park brake: Eaton Airflex 338 DBBS
Lebus Grooving: 1-1/4"
Drum speed range: 0 - 500RPM
Crown/Floor Saver (PLC controlled): Included
Height: 136', Telescopic
Rating: 715,000lbs
Mast Rasing: with Drawworks
Racking cap.: 14,580ft of 5" R-II DP (156 stands of 5" DP + 8 stands of 8" DC in triples)
Mast Transport Trailer: Included
Top Drive / Hookblock cradle: Included
Mast Stand: Included (Hydrulic)
Hydraulic Catworks: Included
Standpipe: 5" x 5,000psi, Single
Rackingboard windwalls: Included

Down The Hole Water Well Mining Dth Drill Pipe

Show Details ︿ Show Less﹀

Down The Hole Water Well Mining Dth Drill Pipe

Products Description:-

Down th hole drill pipes play a significant role in all DTH drilling, regardless of application, rock type, hole depth or drill rig. The key features of a high quality DTH tube are durability, accuracy and manageability.

Standard DTH drill pipe:

Diameter: 76mm, 89mm, 102mm, 114mm, 127mm, 140mm,
Length: 1000mm, 1500mm, 2000mm, 3000mm, 5000mm, 6000mm;
Thread: 2 3/8” API REG, 2 7/8” API REG, 3 1/2” API REG, 4 1/2” API REG, 2 3/8 API IF, 3 1/2 API IF

Special DTH drill pipe:

The drill pipe for Atlas Copco – Ingersol Rand T4, Schramm T64, Atlas Copco F6, L6 and L8, and the drill pipe for Sandvik Driltech D25/D40K.

Api 4" Drill Pipe For Oil Drilling

Show Details ︿ Show Less﹀

Api 4" Drill Pipe For Oil Drilling

Product Description

4" drill pipe
1.Reliable bearing
2.reasonable price
3.quality assurance
4.Many models

4" drill pipe

Product range: O.D. 1/4"-48"( 13.7mm - 1219.2mm )

Main Standard: API 5L, GB/T 8163, EN10216 etc

Material:A106GrA,B,C,A53GrA,B,C,API 5L X70, X65, X60, X42,X46,X52,X56,GR.B, Q345, Q235, Q195, 20#, 10#, S235JRH, S275JOH, S355JOH,P325TR1,ST37,ST52,ST37.4,ST45 etc

Specification of 4" drill pipe

Length: Random length / 5.8m / 6m / 11.8m / 12 or as per customer’s requirement

Ends: Beveled / Straight cut; Plastic or Metal ends protectors

Coating: Black painting / Vanish painting / 1PE/ 3PE/ FBE coated

Marking: According to standard or according the client's requirement

Packing: In bundles or Loose

Mining Machine Dth Tools Api 2 3/8 Water Well Drilling Dth Pipe

Show Details ︿ Show Less﹀

Mining Machine Dth Tools Api 2 3/8 Water Well Drilling Dth Pipe

Description:-

Acedrills has DTH drill rods with several different thickness designs for each diameter, made from different grade steels for selection. So, in practice of field drilling, under different condition, there may be in need of different kinds of drill rods for particular application. For example, the thicker ones with general high quality grade steel for drilling hole of average depth, such as blasting holes; and the thinner ones with better grade steel for drilling hole of very deep, such as drilling for ground thermal. Moreover, Acedrills’ DTH drill rods are also well heat-treated, precision manufactured, and friction-welded.

H22 B22 Raise Boring Drill Rod/ Mine Drill Rod/ Drill Pipe

Show Details ︿ Show Less﹀

H22 B22 Raise Boring Drill Rod/ Mine Drill Rod/ Drill Pipe

Description:-

Our raw material is from 320*480 large-section continuous casting billet, then rolling into 150*150 square billet by drilling holes and inserting seamless pipe, and made of 55SiMnMo. The whole production involves multiple processes, including steel rolling, forging, quenching and tempering, etc. According to the different choices of customers, our company has different quality products, such as extra-excellent, excellent, ordinary drilling rod, etc. Customers can choose suitable drilling rod according to different hardness of rock and types of jack hammer. Extra-excellent drilling rod QSAAA and GTIII can be applied to solid rock, III level or above and f≥12 rocks according to Protodikonov’s Hardness Coefficient of Rock. Excellent drilling rod QSAA and G30 is suitable for IV level or above and f≥12 rocks, ordinary drilling rod suitable for IV level or below and f≤8 rocks.

Drilling Dth Pipe

Show Details ︿ Show Less﹀

Drilling Dth Pipe

Product descripion of rock dth drilling pipe:

DTH drill rod is made of high qualitymaterial detected inspectrograph, impact and tension test.
Lengh: 1000mm-6000mm
Diameter:76mm-114mm
Wall thickness: 6mm-6.5mm
Connection thread: 2 3/8" 3 1/2"API REG

DTH drill pipe with friction welding technique, and the jionts are given forging, and quenching and tempering treatment.

High Quality Tapered Drill Rod Drill Pipe Manufacture

Show Details ︿ Show Less﹀

High Quality Tapered Drill Rod Drill Pipe Manufacture

Description:-

1. Raw material: It is 55SiMnMo or 95CrMo and 320*480 large-section continuous casting billet, then rolling into 150*150 square billet after inserting core rod and seamless pipe.

2. Production process: involving multiple processes, such as steel rolling, forging, normalizing,quenching and tempering, etc.

3. Shank size: H22*108mm/ H25*108mm/H25*159mm.

4. Angle: 7 /11/12 degree.

5. Package: 5 pieces with a small bundle,50 or 100 pieces with a big bundle.

Quality Level

According to the different choices of customers, we offer four quality products, including Grade A,Grade B,Grade C and Grade D. Customers can choose suitable drill rod according to different hardness of rock and types of rock drilling tools. Grade A drill rod QSAAA and GTIII can be applied to solid rock, III level or above and f≥12 rocks according to Protodikonov’s Hardness Coefficient of Rock. Grade B drill rod QSAA and G30 is suitable for IV level or above and f≥12 rocks, Grade C and Grade D drill rod suitable for IV level or below and f≤8 rocks.

Good Price Heavy Weight Drill Pipe For Well Drilling

Show Details ︿ Show Less﹀

Good Price Heavy Weight Drill Pipe For Well Drilling

Description:-

Heavy weight drill pipe is a medium-weight drill tool similar to drill pipe, whose wall is thicker than that of drill pipe and thinner than that of drill collar. Its tube is connected with special length-added drill pipe joint (integral heavy weight drill pipe is made up of tube and tool joint). Among assemblies, it is generally added between drill pipe and drill collar to prevent sudden changes in cross-section of drill string, and reduce its fatigue. Using it to replace part of the drill collar can reduce torque, improve load, and increase drilling ability during deep well drilling; meanwhile pick-up sub and safety clamp will not be used drilling operation ,which is easy to operate and can save tripping time. It can drill in in high speed under low torque in directional wells and reduces the abrasion and fracture of string without differential pressure and sticking because of the lower steel grade than drill collar, small touching area with the well wall

Manufacturer Competitive High-Intensity Thread Drill Pipe Price

Show Details ︿ Show Less﹀

Manufacturer Competitive High-Intensity Thread Drill Pipe Price

Description:-

Our thread drill rods are made of high-intensity alloy steel imported from Sweden. All the trails and threads are formed by high precision CNC machines. The thread is induced by induction hardening, then fast heating and cooling. The precision temperature controlled heat treatment equipment ensures the service life of the drill rod, improves the mechanical properties of the drill rod, Holistic carburization increases the carbon content in the outer layer of drill rod, and hardened outer steel body. The solid thread can fit perfectly with the inner wall of the drill bits,and complete various roadway tunneling, underground mining and open pit drilling task in complex rock and terrain rough drilling with high precision and high efficiency .

Rock Drill Tools Drill Rod Drill Pipe Sleeve Type Threaded Coupling Sleeves Manufacturer

Show Details ︿ Show Less﹀

Rock Drill Tools Drill Rod Drill Pipe Sleeve Type Threaded Coupling Sleeves Manufacturer

Description:-

Acedrills' coupling sleeves are available with both half-bridge and full-bridge types, as well as adapter couplings.

Semi-bridge coupling, by far is the most popular, has a small non-threaded bridge in the centre. The drill rod cannot thread past the centre of the couplings, and the smaller diameter rods portions butt together in the centre bridge area of the coupling. Semi-bridge couplings are most suited to high torque machines. Most rope (R) and Trapezoidal (T) threaded couplings are semi-bridged.

R32 R38 T38 T45 T51 Threaded Pipe Coupling Sleeves For Bench Drilling

Show Details ︿ Show Less﹀

R32 R38 T38 T45 T51 Threaded Pipe Coupling Sleeves For Bench Drilling

Specification for Coupling Sleeve for hydraulic, top hammer drilling tools
Material	Structural Alloy Steel
Application	Tunnel , Blasting , Mining , Quarrying, Piling, Indutrial water-well, and Infrastructure Construction
Application	Facedrilling and Bolting, Bench Drilling, Production drilling, Long hole drilling
Thread Type	R32, R35, R38, T38, T45, T51
Coupling Sleeve Type	Same / Different diameter
Coupling Sleeve Length	150mm~255mm

Api 5dp

Show Details ︿ Show Less﹀

Api 5dp

Casing pipe is the major structural component of a well. The API 5CT Casing pipe is a large-diameter steel pipe that serves as the structural retainer for the walls of oil and gas wells, and typically held into place with cement.

API 5CT casing is inserted into a well bore and cemented in place to protect both subsurface formations and the wellbore from collapsing and to allow drilling fluid to circulate and extraction to take place. The cost of casing is a major part of the overall well cost, so selection of casing size, grade, connectors, and setting depth is a primary engineering and economic consideration.

Specefication:-

Standard - API 5CT
Grade - H40, J55/K55, N80-1, N80Q, R95, M65, L80-1, L80-9Cr, L80-13Cr, C90-1, T95-1, C110, P110, Q125
Thickness - 5.12mm –22.22 mm
Outer Diameter - 4.5 inch –20 inch
Application - Oil Casing
Delivery Condition - Hot Rolled, Q&T
End Type - P, SC, LC, BC
Surface Treatment - Varnished or rust preventing paint
Packing - In bundles as per API standard

Tapered Drill Rods Tungsten H22*108mm Integral Drill Rods Drill Pipe

Show Details ︿ Show Less﹀

Tapered Drill Rods Tungsten H22*108mm Integral Drill Rods Drill Pipe

Description:-

Product Name:	Tapered drill rods H22*108mm rock drill steel rod for mines
Types:	Tapered drill rods, Integral drill rods
Application:	Tapered drill rods are used in granite and marble quarry, gold mine, railway, tunnel, etc. for drilling
Material:	High quality carbide and high quality steel 55SiMnMo
MOQ:	No requirement for testing and trial order
We can produce as your request of carbide size, different length of drill rods.
Types of drill rods	Specifications	Length (mm)	Shank	Weight (kg)
Tapered drill rods	Taper Angle: 4, 6, 7, 11, 12 degree	400mm to 8000mm	Hex22mm108mm Hex25mm159mm Hex19mm*108mm	1.7 - 24.9
Integral drill steel	Bit diameter: 26mm, 28mm, 30mm, 32mm, 34mm, 36mm, 38mm, 40mm, 42mm	400mm to 4800mm	Hex22mm108mm Hex25mm159mm Hex19mm*108mm	3.0 – 15.4

1.5 Metres Length Nq Drill Rod Drill Pipe For Core Drilling Rig Tools

Show Details ︿ Show Less﹀

1.5 Metres Length Nq Drill Rod Drill Pipe For Core Drilling Rig Tools

Description:-

Wireline drill rods are manufactured from the best quality heat-treated seamless steel tubes according to S135 steel grade standard. Ultimate tensile strength,yield strength, high precision and good straightness provide the best performance under different drilling conditions.

Case hardening on rod’s end protects thread connection and increases its wear resistance and rod life.

Has many years of experience in manufacturing coring drill rods, we try to provide you the most cost-efficient products.

Retrieving core samples from deep holes requires trust worthy equipment and tools . Unnecessary pulling of rods from these depths is time consuming – and time is money!

We’re always pround of our drill rods quality.

Features of Drill Rod
1. Good and consistent concentricity & straightness
2. thru-wall heat-treated tube body and hardening on the thread
3. Long service life

Api Certificate Drill Pipe With Oil And Gas And Water Well Drilling

Show Details ︿ Show Less﹀

Api Certificate Drill Pipe With Oil And Gas And Water Well Drilling

Description:-

Drill Pipe List

Size(inch)	Weight(kg)	Wpe(kg/m)	O.D(inch)	Wall Thickness(inch)	Grade	Upset Ends
2 3/8	6.65	9.33	2.375	0.280	E/X/G/S	E.U.
2 7/8	10.40	14.47	2.875	0.362	E/X/G/S	E.U or I.U.
3 1/2	9.5	13.12	3.500	0.254	E	E.U or I.U.
3 1/2	13.30	18.34	3.500	0.368	E/X/G/S	E.U or I.U.
3 1/2	15.50	21.79	3.500	0.449	E	E.U or I.U.
3 1/2	15.50	21.79	3.500	0.449	X/G/S	E.U or I.E.U
4	14	19.27	4.000	0.330	E/X/G/S	E.U or I.U.
4 1/2	13.75	18.23	4.500	0.271	E	E.U or I.U.
4 1/2	16.60	22.32	4.500	0.337	E/X/G/S	E.U or I.U.
4 1/2	20.00	27.84	4.500	0.430	E/X/G/S	E.U or I.U.
5	16.25	22.16	5.000	0.296	X/G/S	I.U.
5	19.50	26.70	5.000	0.362	E	I.E.U.
5	19.50	26.70	5.000	0.362	X/G/S	E.U or I.U.
5	25.60	35.80	5.000	0.500	E	I.U.
5	25.60	35.80	5.000	0.500	X/G/S	E.U or I.U.
5 1/2	21.90	29.52	5.500	0.361	E/X/G/S	I.E.U.
5 1/2	24.70	33.57	5.500	0.415	E/X/G/S	I.E.U.
6 5/8	25.20	33.04	6.625	0.330	E/X/G/S	I.E.U.
6 5/8	27.72	36.06	6.625	0.362	E/X/G/S	I.E.U.

Heavy Weight Drill Pipe List

Size	Tube OD	Tube ID	Tool Joint OD	Tool Joint ID	Connection	Max Elevator Upset Dia.	Center Upset Dia.	Min. Drift Dia.
						Deu	Dcu
3 1/2	3 1/2	2 1/4	4 3/4	2 1/4	NC38	3 7/8	4	2
		2 1/16	4 7/8, 5	2 1/16				1 13/16
4	4	2 1/2	5 1/4	2 1/2	NC40	4 3/16	4 1/2	2 1/4
				2 9/16				2 5/16
4 1/2	4 1/2	2 11/16	6 1/4	2 11/16	NC46	4 11/26	5	2 7/16
		2 3/4		2 3/4				2 1/2
		2 13/16		2 13/16				2 9/16
5 1/2	5 1/2	3 1/4	7	3 1/4	5 1/2FH	5 11/16	6	3
		3 8/3	7 1/7, 71/2	3 3/8				3 1/8
		3 7/8		3 7/8				3 5/8,3 3/4
		4		4				3 3/4
6 5/8	6 5/8	4	8	4	6 5/8FH	6 15/16	7 1/8	3 3/4
		4 1/2	8 1/4, 8 1/2	4 1/2				4 1/4
		5		5				4 3/4

Drilling Tools Dth Water Well Oil Drill Pipe Heavy Weight Drill Pipe

Show Details ︿ Show Less﹀

Drilling Tools Dth Water Well Oil Drill Pipe Heavy Weight Drill Pipe

Description:-

DTH Drill Rods (Tubes/Pipes) and Sub Adaptors: DTH drill rods with several different thickness designs for each diameter, made from different grade steels for selection. So, in practice of field drilling, under different condition, there may be in need of different kinds of drill rods for particular application. For example, the thicker ones with general high quality grade steel for drilling hole of average depth, such as blasting holes; and the thinner ones with better grade steel for drilling hole of very deep, such as drilling for ground thermal. Moreover, DTH drill rods are also well heat-treated, precision manufactured, and friction-welded.

Specification:-

Diameter		Length		Connection Thread	Wall Thickness
mm	inch	mm	Foot		mm	inch

60	2 3/8	1,000~4,500	3 3/8 ~ 14 3/4	T42×10×2	5~8	13/64~5/16
76	3	1,000~4,500	3 3/8 ~ 14 3/4	2 3/8” API REG	5~8	13/64~5/16
89	3 1/2	1,000~7,620	3 3/8 ~ 25	2 3/8” API REG/IF	5~12	13/64~15/32
102	4	1,000~9140	3 3/8 ~ 30	2 3/8” API REG, 2 7/8” API IF, 3 1/2” API REG	6.5~20	1/4~25/32
108	4 1/4	1,000~9140	3 3/8 ~ 30	2 3/8” API REG, 2 7/8” API IF, 3 1/2” API REG	6.5~20	1/4~25/32
114	4 1/2	1,000~10,670	3 3/8 ~ 35	2 7/8” API IF, 3 1/2” API REG	6.5~20	1/4~25/32
127	5	1,000~10,670	3 3/8 ~ 35	3 1/2” API REG	8~20	5/16~25/32
133	5 1/4	1,000~10,670	3 3/8 ~ 35	3 1/2” API REG	8~20	5/16~25/32
140	5 1/2	1,000~10,670	3 3/8 ~ 35	3 1/2” API REG	10~22	25/64~7/8
146	5 3/4	1,000~10,670	3 3/8 ~ 35	3 1/2” API REG	10~22	25/64~7/8
152	6	1,000~10,670	3 3/8 ~ 35	4 1/2” API REG	10~22	25/64~7/8

2 3/8" Hole Diameter Used Oil Well Hdd Drill Pipe For Oilfield

Show Details ︿ Show Less﹀

2 3/8" Hole Diameter Used Oil Well Hdd Drill Pipe For Oilfield

Description:-

Drill Pipe List

Size(inch)	Weight(kg)	Wpe(kg/m)	O.D(inch)	Wall Thickness(inch)	Grade	Upset Ends
2 3/8	6.65	9.33	2.375	0.280	E/X/G/S	E.U.
2 7/8	10.40	14.47	2.875	0.362	E/X/G/S	E.U or I.U.
3 1/2	9.5	13.12	3.500	0.254	E	E.U or I.U.
3 1/2	13.30	18.34	3.500	0.368	E/X/G/S	E.U or I.U.
3 1/2	15.50	21.79	3.500	0.449	E	E.U or I.U.
3 1/2	15.50	21.79	3.500	0.449	X/G/S	E.U or I.E.U
4	14	19.27	4.000	0.330	E/X/G/S	E.U or I.U.
4 1/2	13.75	18.23	4.500	0.271	E	E.U or I.U.
4 1/2	16.60	22.32	4.500	0.337	E/X/G/S	E.U or I.U.
4 1/2	20.00	27.84	4.500	0.430	E/X/G/S	E.U or I.U.
5	16.25	22.16	5.000	0.296	X/G/S	I.U.
5	19.50	26.70	5.000	0.362	E	I.E.U.
5	19.50	26.70	5.000	0.362	X/G/S	E.U or I.U.
5	25.60	35.80	5.000	0.500	E	I.U.
5	25.60	35.80	5.000	0.500	X/G/S	E.U or I.U.
5 1/2	21.90	29.52	5.500	0.361	E/X/G/S	I.E.U.
5 1/2	24.70	33.57	5.500	0.415	E/X/G/S	I.E.U.
6 5/8	25.20	33.04	6.625	0.330	E/X/G/S	I.E.U.
6 5/8	27.72	36.06	6.625	0.362	E/X/G/S	I.E.U.

Heavy Weight Drill Pipe List

Size	Tube OD	Tube ID	Tool Joint OD	Tool Joint ID	Connection	Max Elevator Upset Dia.	Center Upset Dia.	Min. Drift Dia.
						Deu	Dcu
3 1/2	3 1/2	2 1/4	4 3/4	2 1/4	NC38	3 7/8	4	2
		2 1/16	4 7/8, 5	2 1/16				1 13/16
4	4	2 1/2	5 1/4	2 1/2	NC40	4 3/16	4 1/2	2 1/4
				2 9/16				2 5/16
4 1/2	4 1/2	2 11/16	6 1/4	2 11/16	NC46	4 11/26	5	2 7/16
		2 3/4		2 3/4				2 1/2
		2 13/16		2 13/16				2 9/16
5 1/2	5 1/2	3 1/4	7	3 1/4	5 1/2FH	5 11/16	6	3
		3 8/3	7 1/7, 71/2	3 3/8				3 1/8
		3 7/8		3 7/8				3 5/8,3 3/4
		4		4				3 3/4
6 5/8	6 5/8	4	8	4	6 5/8FH	6 15/16	7 1/8	3 3/4
		4 1/2	8 1/4, 8 1/2	4 1/2				4 1/4
		5		5				4 3/4

Octg Tubing/ Casing/ Drill Pipe Thread Protector

Show Details ︿ Show Less﹀

Octg Tubing/ Casing/ Drill Pipe Thread Protector

Description:-

API 5CT Tubing and tubing coupling thread protector
size	Thread type	Material	Color
2-3/8"	NUE, EUE	HDPE, plastic Steel plastic	Black, red or customer's demand
2-7/8"
3-1/2"
4"
4-1/2"

Casing and casing coupling thread protector
Size	Thread type	Material	Color
4-1/2"	BTC, LTC, STC	HDPE,plastic Steel plastic	Black, red or customer's demand
5"
5-1/2"
6-5/8”
7”
7-5/8"
8-5/8"
9-5/8"
10-3/4"
11-3/4"
13-3/8"
16"
18-5/8"
20"

Bore Well Drilling Parts Hollow Tapered Drill Pipe Various Size

Show Details ︿ Show Less﹀

Bore Well Drilling Parts Hollow Tapered Drill Pipe Various Size

Description:-

Our raw material is from 320*480 large-section continuous casting billet, then rolling into 150*150 square billet by drilling holes and inserting seamless pipe, and made of 55SiMnMo. The whole production involves multiple processes, including steel rolling, forging, quenching and tempering, etc. According to the different choices of customers, our company has different quality products, such as extra-excellent, excellent, ordinary drilling rod, etc. Customers can choose suitable drilling rod according to different hardness of rock and types of jack hammer. Extra-excellent drilling rod QSAAA and GTIII can be applied to solid rock, III level or above and f≥12 rocks according to Protodikonov’s Hardness Coefficient of Rock. Excellent drilling rod QSAA and G30 is suitable for IV level or above and f≥12 rocks, ordinary drilling rod suitable for IV level or below and f≤8 rocks.

Specification:-

Drill rod	Length		Piece	Weight approx(kg)
Hex.22 Tapered rod Shank Length 108mm Tapered Angle 7º Shank hole diameter 7.5±0.3 Body hole diameter ≥5.5	Millimeter(mm)	Foot	Piece	Weight approx(kg)
	1000	3’3’’	100	315
	1200	3’9’’	100	370
	1400	4’6’’	100	435
	1500	4’9’’	100	465
	1600	5’2’’	100	495
	1800	5’9’’	100	555

102 Mm Water Well Drill Pipe Used / 3m Dth Drill Pipe 2 7/8

Show Details ︿ Show Less﹀

102 Mm Water Well Drill Pipe Used / 3m Dth Drill Pipe 2 7/8

Description:-

Tapered drill rods is mainly used in the drilling blasting hole, guardrail hole, mountain reinforcment, anchoring and other engineering holes in mines, quarris, high ways, railways and so on.It has a long service life.and the y’re also subjected to high bending stress,transferring the percussion energy from rock drill to drilling bit and then into the rock.

Size

PART #	Length		Weight
PART #	MM	FT/IN	KG	LB
T38	1220-6095	3’-20’	10.2-53.9	22.5-118.8
T45	1830-6095	6’-20’	21.6-89.4	47.6-197
T51	3050-6095	10’-20’	45.3-92.4	99.8-203.7
R32	2400-6400	7’11’’-21’	15.3-50.3	33.7-110.8
R38	2400-6400	7’11’’-21’	15.3-50.3	33.7-110.8

Drill Pipe Clamp Drill Pipe With Auger Flight, Spiral Drill Rod

Show Details ︿ Show Less﹀

Drill Pipe Clamp Drill Pipe With Auger Flight, Spiral Drill Rod

Description:-

Craft: prestressed wire winding and welding on the basis of merits from German craft. Material: high pressure seamless alloy pipe (rod body); high wear-resistant T-shape strip steel (spiral); medium carbon alloy steel which has been thermal refined in vacuum (connector).

Connection type between rods: spring pin with U-shape or semi-ring retaining pin, which guarantees the max torque of the rod. Matching: portable or hand-held drilling machine Feature: light, quick connection, quick slagging, high efficiency.

Technical parameters

	Diameter	Spiral diameter	Steel products	Torque	Depth	Bit diameter	Joint hardness
1	34mm	50-80mm	DZ50	2000n/m	100m	65-113mm	HRC28-32
2	42mm	50-100mm	DZ50	3000n/m	100m	65-146mm	HRC28-32
3	50mm	73-150mm	DZ50	5000n/m	100m	94-200mm	HRC28-32
4	60mm	73-170mm	R780	7000n/m	150m	94-250mm	HRC28-32
5	63.5mm	73-200mm	R780	8000n/m	200m	94-250mm	HRC28-32
6	73mm	89-250mm	R780	10000n/m	200m	108-300mm	HRC28-32
7	89mm	100-300mm	R780	12000n/m	300m	108-350mm	HRC28-32

2018 Hot Sale Friction Welding Composite Drill Pipe/drill Rod

Show Details ︿ Show Less﹀

2018 Hot Sale Friction Welding Composite Drill Pipe/drill Rod

Specification:-

2018 Hot sale Friction welding composite drill pipe/drill rod

Specification	73,76,89,114,133,146,168
Length	1.5m, 2 m, 3m
Material	R780, BG850
Color	Black
Thread standard	2-3/8 REG, waveform
Rotary item	dextral screw thread
Thick wall of the tube	6.5mm-10mm
Weight	25-70kg
Load torque	5000-14000NM

Drill Pipe 2 7 8

Show Details ︿ Show Less﹀

Drill Pipe 2 7 8

Description:-

Size: 2 1/2'', 2 3/4'', 3'', 3 1/2'', 4'', 4 1/2'', 5'', 5 1/2'', 6'', 8'', 10'', 10 3/4'';

Length: 1m-6m;

Thread size: 2 3/8"API Reg, 2 7/8" API Reg, 3 1/2" API Reg, 4 1/2" API Reg, 2 3/8" API IF, 3 1/2" API IF; BECO 6'', BECO 8'';

Wall thickness: 4mm-16mm;

Other sizes and special DTH pipes can be available according to customer's drawing or samples

5 Inch Drill Pipe

Show Details ︿ Show Less﹀

5 Inch Drill Pipe

Description:-

Our company's drill pipes are in accordance with API 5DP, API SPEC 7 Standards. The material of drill pipe body are chosen by the 1&3 group of API 5D. (Group 1-Grade E75; Group 3-Grade X95, G105, S135).

The choice of tool joints is according to the requirements, and the tool joints are up to API SPEC7

Model NO.: 2 3/8"---6 5/8" drill pipe

Standard: API SPEC 5D API SPEC7-1 drill pipe

Wall Thickness: Thick drill pipe as to yoru reec

5.5 Inch Drill Pipe

Show Details ︿ Show Less﹀

5.5 Inch Drill Pipe

Discription:-

Our company's drill pipes are in accordance with API 5DP, API SPEC 7 Standards. The material of drill pipe body are chosen by the 1&3 group of API 5D. (Group 1-Grade E75; Group 3-Grade X95, G105, S135).

The choice of tool joints is according to the requirements, and the tool joints are up to API SPEC7

Model NO.: 2 3/8"---6 5/8" drill pipe

Standard: API SPEC 5D API SPEC7-1 drill pipe

Wall Thickness: Thick drill pipe as to yoru reec

Api Drilling Pipe Manufacturers

Show Details ︿ Show Less﹀

Api Drilling Pipe Manufacturers

Description:-

Our company's drill pipes are in accordance with API 5DP, API SPEC 7 Standards. The material of drill pipe body are chosen by the 1&3 group of API 5D. (Group 1-Grade E75; Group 3-Grade X95, G105, S135).

The choice of tool joints is according to the requirements, and the tool joints are up to API SPEC7

Model NO.: 2 3/8"---6 5/8" drill pipe

Standard: API SPEC 5D API SPEC7-1 drill pipe

Wall Thickness: Thick drill pipe as to yoru reec

Api 7-1 Hwdp Heavy Weight Drill Pipe For Drilling

Show Details ︿ Show Less﹀

Api 7-1 Hwdp Heavy Weight Drill Pipe For Drilling

Description:-

Heavy weight drill pipe is a medium-weight drill tool similar to drill pipe, whose wall is thicker than that of drill pipe and thinner than that of drill collar. Its tube is connected with special length-added drill pipe joint (integral heavy weight drill pipe is made up of tube and tool joint). Among assemblies, it is generally added between drill pipe and drill collar to prevent sudden changes in cross-section of drill string, and reduce its fatigue. Using it to replace part of the drill collar can reduce torque, improve load, and increase drilling ability during deep well drilling; meanwhile pick-up sub and safety clamp will not be used drilling operation ,which is easy to operate and can save tripping time. It can drill in in high speed under low torque in directional wells and reduces the abrasion and fracture of string without differential pressure and sticking because of the lower steel grade than drill collar, small touching area with the well wall.

Integral heavy weight drill pipe
Size	Outer diameter	Inside diameter	Joint outer diameter	Joint inside diameter	Connecting thread	Slip max. diameter	Upset middle diameter	Min. drift diameter
3 1/2	3 1/2	2 1/4	4 3/4	2 1/4	NC38	3 7/8	4	2
3 1/2	3 1/2	2 1/16	(4 7/8, 5)	2 1/16	NC38	3 7/8	4	1 13/16
4	4	2 1/2	5 1/4	2 1/2	NC40	4 3/16	4 1/2	2 1/4
4	4	2 9/16	5 1/4	2 9/16	NC40	4 3/16	4 1/2	2 5/16
4 1/2	4 1/2	2 11/16	6 1/4	2 11/16	NC46	4 11/16	5	2 7/16
		2 3/4		2 3/4				2 1/2
		2 13/16		2 13/16				2 9/16
5	5	3	6 5/8	3	NC50	5 1/8	5 1/2	2 3/4
5 1/2	5 1/2	3 1/4	7	3 1/4	5 1/2 FH	5 11/16	6	3
		3 3/8	(7 1/4, 7 1/2)	3 3/8				3 1/8
		3 7/8		3 7/8				3 5/8
		4		4				3 3/4
6 5/8	6 5/8	4	8	4	6 5/8 FH	6 15/16	7 1/8	3 3/4
		4 1/2	(8 1/4, 8 1/2)	4 1/2				4 1/4
		5		5				4 3/4

R25 R28 R32 T38 T45 T51 Gt60 Thread Type Drilling Pipe Drill Rod For Tunnelling

Show Details ︿ Show Less﹀

R25 R28 R32 T38 T45 T51 Gt60 Thread Type Drilling Pipe Drill Rod For Tunnelling

Specification for Drill Rod for hydraulic, top hammer drilling tools
Material	Structural Alloy Steel
Application	Tunnelling, Mining, Quarrying, Blasting and Infrastructure Construction
Application	Facedrilling and Bolting, Bench Drilling, Production drilling, Long hole drilling
Thread Type	H22, R25, R28, R32, R35, R38, T38, T45, T51, GT60, ST58, ST68
Rod Type	Extension rod，Drifter rod，MF rod，MF Drifter rod, Guide tube, Tapered drill rod, Integral drill steel, Plug hole integral rod
Body Type	Hexagonal type，Round type
Rod Length	260mm~6440mm
Custom Design	Thread, Diameter, Length, Color can be customized

Thread Type Drilling Pipe Extension Rod And Mf Rod Drill Rod For Blasting And Infrastructure Construction

Show Details ︿ Show Less﹀

Thread Type Drilling Pipe Extension Rod And Mf Rod Drill Rod For Blasting And Infrastructure Construction

Specification for Drill Rod for hydraulic, top hammer drilling tools
Material	Structural Alloy Steel
Application	Tunnelling, Mining, Quarrying, Blasting and Infrastructure Construction
Application	Facedrilling and Bolting, Bench Drilling, Production drilling, Long hole drilling
Thread Type	H22, R25, R28, R32, R35, R38, T38, T45, T51, GT60, ST58, ST68
Rod Type	Extension rod，Drifter rod，MF rod，MF Drifter rod, Guide tube, Tapered drill rod, Integral drill steel, Plug hole integral rod
Body Type	Hexagonal type，Round type
Rod Length	260mm~6440mm
Custom Design	Thread, Diameter, Length, Color can be customized

Drill Pipe Pup Joint Downhole Tools Oilfield Equipment

Show Details ︿ Show Less﹀

Drill Pipe Pup Joint Downhole Tools Oilfield Equipment

Description:-

Tubing pup joint

Tubing pup joint	Specification	API 5CT 1.9”, to 4-1/2”
	Steel grade	J55, L80, N80
	Thread type	EUE, NUE
	Length	As requsted

Casing pup joint

Casing pup joint	Specification	API 5CT 4-1/2” to 13-3/8”
	Steel grade	J55, K55, L80,N80, P110
	Thread type	STC, LTC, BTC
	Length	As requsted

API pup joint specification

Specification	O.D(mm)	W.T(mm)	Thread type	Steel grade	Length
4-1/2	114.30	6.35	STC,LTC,BTC	J55,N80,P110	0.5m-5m
5	127.00	7.52	STC,LTC,BTC	J55,N80,P110
5-1/2	139.70	7.72	STC,LTC,BTC	J55,N80,P110
6-5/8	168.28	8.94	STC,LTC,BTC	J55,N80,P110
7	177.80	8.05	STC,LTC,BTC	J55,N80,P110
7-5/8	193.68	8.33	STC,LTC,BTC	J55,N80,P110
8-5/8	219.08	10.16	STC,LTC,BTC	J55,N80,P110
9-5/8	244.48	10.03	STC,LTC,BTC	J55,N80,P110
10-3/4	273.05	11.43	STC,LTC,BTC	J55,N80,P110
11-3/4	298.45	12.42	STC,LTC,BTC	J55,N80,P110
13-3/8	339.72	12.19	STC,LTC,BTC	J55,N80,P110
16	406.40	12.57	STC,LTC,BTC	J55,N80,P110
18-5/8	473.08	11.05	STC,LTC,BTC	J55,N80,P110
20	508.00	12.70	STC,LTC,BTC	J55,N80,P110

Drilling Rig Accessories Drill Pipe

Show Details ︿ Show Less﹀

Drilling Rig Accessories Drill Pipe

Description:-

down th hole drill pipes play a significant role in all DTH drilling, regardless of application, rock type, hole depth or drill rig. The key features of a high quality DTH tube are durability, accuracy and manageability. Sinodrills DTH drill pipes are made

of superior alloy and the both thread ends are friction welded to the seamless steel pipe.The high pressure air is delivered to DTH hammer by DTH drill pipe, simultaneously it transfers the rotation and press force to the DTH hammer.

Product name	drill pipe
Size	2 3/8 REG
Outer diameter	76/89/102/114/127mm
Machine Type	Drilling Equipment
Color	black or customized
Processing Type	Forging
Application	construction works/mining

Api Standard Oil Well Couplings For Drilling Pipes

Show Details ︿ Show Less﹀

Api Standard Oil Well Couplings For Drilling Pipes

Description:-

Product Name		Tubing casing coupling
Model Numer		1.9"-20"
Certification		API 5CT
Material		Alloy steel
Processing Type		Turning
Surface treatment		Whole phosphating, or inside phosphating and outside coating
Usage		Internally threaded cylinder for joining two lengths of threaded casing pipe
Casing coupling	Specification	API 5CT 4-1/2” to 20”
	Steel grade	J55, K55, L80,N80, P110
	Thread type	STC, LTC, BTC
	Details	4-1/2", 5", 5-1/2", 6-5/8", 7", 7-5/8", 8-5/8", 9-5/8", 10-3/4", 11-3/4", 13-3/8", 16", 18-5/8", 20"
Tubing coupling	Specification	API 5CT 1.9”, to 4-1/2”
	Steel grade	J55, L80, N80
	Thread type	EUE, NUE
	Details	1.9", 2-3/8", 2-7/8", 3-1/2", 4", 4-1/2"

Reverse Circulation Drilling Rc Dual Wall Drill Rod Drill Pipe

Show Details ︿ Show Less﹀

Reverse Circulation Drilling Rc Dual Wall Drill Rod Drill Pipe

Description:-

Model	Outer tube size	Inner tube size	Connection mode of inner tube	Joint thread
SHB73/38	φ73*8	φ45*3.5	Plug-in connection type	Special connection type
SHB89/41	φ89*8	φ51*5	Plug-in connection type	Special connection type
SHB102/41	φ102*8.56	φ51*5	Plug-in connection type	Special connection type
SHB114/55	φ114*8	φ63.5*4	Plug-in connection type	Special connection type

Friction Welding Drilling Tool Dth Drill Rod Drill Pipe For Rock Blasting

Show Details ︿ Show Less﹀

Friction Welding Drilling Tool Dth Drill Rod Drill Pipe For Rock Blasting

Description:-

Regular Models of Tricone Bits
Regular Sizes	Regular IADC	API Reg Pin	Make-up Torque(N.m)
3 7/8"(98.4mm)	126/216/637	2 3/8	4100~4700
4 5/8"(117.4mm)	126/216/517/537/637	2 7/8	6100~7500
5 1/4"(133.3mm)	126/216/517/537/637	3 1/2	9500~12200
5 5/8"(142.8mm)	126/216/517/537/637	3 1/2	9500~12200
5 7/8"(149.2mm)	126/216/517/537/637	3 1/2	9500~12200
6"(152.4mm)	126/127/216/517/537/617/637	3 1/2	9500~12200
6 1/4"(158.7mm)	126/127/216/517/537/617/637	3 1/2	9500~12200
6 1/2"(165mm)	126/127/216/517/537/617/637	3 1/2	9500~12200
7 1/2"(190mm)	126/216/517/537	4 1/2	16300~21700
7 5/8"(193mm)	126/216/517/537	4 1/2	16300~21700
7 7/8"(200mm)	126/216/517/537	4 1/2	16300~21700
8 1/2"(215.9mm)	117/127/217/437/517/537/617/637	4 1/2	16300~21700
9 1/2"(241.3mm)	117/127/217/437/517/537/617/637	6 5/8	38000~43400
9 7/8"(250.8mm)	117/127/217/437/517/537/617/637	6 5/8	38000~43400
10 5/8(269.8mm)	117/127/137/217/517/537/617/637	6 5/8	38000~43400
11 5/8(295.3mm)	117/127/137/217/517/537/617/637	6 5/8	38000~43400
12 1/4"(311.1mm)	114/127/217/437/517/537/617/637	6 5/8	38000~43400
13 5/8"(346.0mm)	127/217/517/537/617/637	6 5/8	38000~43400
14 3/4"(374.6mm)	127/217/517/537/617/637	7 5/8	46100~54200
17 1/2"(444.5mm)	114/115/125/215/515/535/615/635	7 5/8	46100~54200
26"(660.4mm)	114/115/125/215/515/535/615	7 5/8	46100~54200

Htw , Htw Drill Rod, Drill Pipe 1m,1.5m

Show Details ︿ Show Less﹀

Htw , Htw Drill Rod, Drill Pipe 1m,1.5m

Description:

1. Drill rods are made from quality heat treated materials which ensure superior strength, wear resistance and toughness in the most demanding applications
2. Rods and casing are manufactured under stringent industry standards, and are field tested under a variety of conditions.
3. All rods are designed to be compatible with other rods manufactured to the standard DCDMA

Wireline drill rod threads

Drill Rod Size Available:
"Q" Series: B, N, H, and P.
"WJ" Design: AWJ, BWJ, NWJ, KWJ, HWJ
"W" Design: RW, EW, AW, BW, NW, HW
Metric Series: 42, 50, 60, 70, 90

Size	Outer Diameter (mm)	Inner Diameter(mm)
AQ	44.7	37.3
BQ	55.7	46.1
NQ	70.0	60.2
HQ	89.0	78.0
PQ(PHD)	114.5	101.5
AW/AWJ/AWY	43.7	30.7
BW/BWJ/BWY	54.0	38.0
NW/NWY	66.8	51.0
HW	89.0	71.0
42mm	42.0	30.0
50mm	50.0	37.0
60mm	60.0	48.0
70mm	73.0	54.6
90mm	89.0	69.0
S75	71.0	61.0

Ntw, Nq Drill Rod, Drill Pipe

Show Details ︿ Show Less﹀

Ntw, Nq Drill Rod, Drill Pipe

Description:

1. Drill rods are made from quality heat treated materials which ensure superior strength, wear resistance and toughness in the most demanding applications
2. Rods and casing are manufactured under stringent industry standards, and are field tested under a variety of conditions.
3. All rods are designed to be compatible with other rods manufactured to the standard DCDMA

Wireline drill rod threads

Drill Rod Size Available:
"Q" Series: B, N, H, and P.
"WJ" Design: AWJ, BWJ, NWJ, KWJ, HWJ
"W" Design: RW, EW, AW, BW, NW, HW
Metric Series: 42, 50, 60, 70, 90

Size	Outer Diameter (mm)	Inner Diameter(mm)
AQ	44.7	37.3
BQ	55.7	46.1
NQ	70.0	60.2
HQ	89.0	78.0
PQ(PHD)	114.5	101.5
AW/AWJ/AWY	43.7	30.7
BW/BWJ/BWY	54.0	38.0
NW/NWY	66.8	51.0
HW	89.0	71.0
42mm	42.0	30.0
50mm	50.0	37.0
60mm	60.0	48.0
70mm	73.0	54.6
90mm	89.0	69.0
S75	71.0	61.0

Drill Pipe Clamp, Drill Pipe With Auger Flight, Spiral Drill Rod

Show Details ︿ Show Less﹀

Drill Pipe Clamp, Drill Pipe With Auger Flight, Spiral Drill Rod

Description:-

Craft: prestressed wire winding and welding on the basis of merits from German craft.

Material: high pressure seamless alloy pipe (rod body); high wear-resistant T-shape strip steel (spiral); medium carbon alloy steel which has been thermal refined in vacuum (connector).

Connection type between rods: spring pin with U-shape or semi-ring retaining pin, which guarantees the max torque of the rod.

Technical parameters

	Diameter	Spiral diameter	Steel products	Torque	Depth	Bit diameter	Joint hardness
1	34mm	50-80mm	DZ50	2000n/m	100m	65-113mm	HRC28-32
2	42mm	50-100mm	DZ50	3000n/m	100m	65-146mm	HRC28-32
3	50mm	73-150mm	DZ50	5000n/m	100m	94-200mm	HRC28-32
4	60mm	73-170mm	R780	7000n/m	150m	94-250mm	HRC28-32
5	63.5mm	73-200mm	R780	8000n/m	200m	94-250mm	HRC28-32
6	73mm	89-250mm	R780	10000n/m	200m	108-300mm	HRC28-32
7	89mm	100-300mm	R780	12000n/m	300m	108-350mm	HRC28-32

Carbon Steel Water Well Drill Pipe

Show Details ︿ Show Less﹀

Carbon Steel Water Well Drill Pipe

Description:-

Introduction

We supply kinds of drilling rigs and accessories,such as drill pipe,drill bit etc.About the drill pipe,we mainly produce water well drill pipe,rock drill rod ,NQ,HQ,AQ drill rod.

All the products allow OEM.

Application

Mainly used for water well drilling,core drilling,geological exploration etc.

Detailed Data

Diameter		Weight		Material	Wall thickness		Thickening Ways	Joint thread
Inch	mm	Lb/ft	Kg/m	Material	Inch	mm	Thickening Ways	Joint thread
2 3/8	60.3	6.26	9.32	E,X,G,S	0.28	7.11	EU	NC26
2 7/8	73	9.72	14.48	E,X,G,S	0.362	9.19	EU IU	NC31
3 1/2	88.9	8.81	13.12	E	0.254	6.45	EU IU	NC38
3 1/2	88.9	12.31	18.34	E,X,G,S	0.368	9.35	EU IU	NC38,NC40
3 1/2	88.9	14.63	21.79	E	0.449	11.4	EU IU	NC38,NC40
3 1/2	88.9	14.63	21.79	X,G,S	0.449	11.4	EU IEU	NC38,NC40
4	101.6	12.93	19.26	E,X,G,S	0.33	8.38	EU IU	NC40,NC46
4 1/2	114.3	12.24	18.23	E	0.271	6.88	EU IU	NC46,NC50
4 1/2	114.3	14.98	22.31	E,X,G,S	0.337	8.56	EU IEU	NC46,NC50
4 1/2	114.3	18.69	27.84	E,X,G,S	0.43	10.92	EU IEU	NC46,NC50
5	127	14.87	22.15	X,G,S	0.296	7.52	IU	NC50,5 1/2 FH
5	127	17.93	26.71	E	0.362	9.19	IEU	NC50,5 1/2 FH
5	127	17.93	26.71	X,G,S	0.362	9.19	EU	NC50,5 1/2 FH
5	127	24.03	35.79	X,G,S	0.5	12.7	EU IEU	NC50,5 1/2 FH
5 1/2	139.7	19.81	29.51	E,X,G,S	0.361	9.17	IEU	5 1/2 FH
5 1/2	139.7	22.54	33.57	E,X,G,S	0.415	10.54	IEU	5 1/2 FH

D40x40 Hdd Drill Pipe/rod

Show Details ︿ Show Less﹀

D40x40 Hdd Drill Pipe/rod

Description:-

Drilling pipes, Sonde housing with drill bits, Fluted reamer, Barrel reamer, Cutting reamer, Swivel, Sub saver, Male and female slider, Shackle, Case slip, Mud stirring system and so on. We can provide these products with good quality by advanced technology.

Manufacturing equipments:

800T End Upsetting Machine, 8 sets CNC Threading Lathes, 1 set of Automatic Shot-blasting Machine, 2 sets of Ultrasonic Inspection Equipments and 1 set of Magnetic Detection Machine.

Quality Inspection:

Advanced crack detection center with real time imaging system and one lab for spectral analysis, hardness, tesile strength, yield and impact tests.

Main Parameters of Forged Drilling Pipe

Specification	Dimension of the drill pipe						Thread	Grade	Min. bending radius (m)	Length of pipe to bend 90° (m)	Max. angle (°s)	Max.% slope %/ pipe %	Torque (Kn.m)
	OD of tube (mm)	Thickness of tube (mm)	Length (m)	Weight (kg)	OD of joints (mm)	Big clamp space of pin joint and box joint (mm)
50(2")	50	6.5	2	20	57	Pin:110	LS50	S135	30	47.1	4.8	8.3	3
			2.5	25		Box:175
60.3(2 3/8")	60.3	7.5	2	25.3	67	Pin:130	LS60	S135	33	51.8	5.2	9.1	6.3
			3	37		Box:180
73(2 7/8")	73	8	3	45	80	Pin:120	NC23	S135	45	70.7	3.8	5	13
			4	58		Box:180
73(2 7/8")	73	10	3	58	87	Pin:120	NC23 NC26	S135	51	80	4.5	7.8	16
			4	78		Box:180
76 (3")	76	10	3	58	87	Pin:100	NC26 D50	S135	56	87	4.7	8	16.5
			4	78		Box:190
83(3 1/4")	83	10	3	55	92	Pin:130	D80 NC31	S135	65	102.1	4	6.9	18
			4.5	75		Box:190
89(3 1/2")	88.9	10	4.5	97	104	Pin:150	D80 NC31	S135	72	113	4.8	8.3	24
			6	126		Box:230

Drill Pipe For Hdd Well Drilling

Show Details ︿ Show Less﹀

Drill Pipe For Hdd Well Drilling

Description of Integral drill rods

Integral drill rods(integral rods or integral drill steels) are used for small hole drilling. Equipped with small power rock drills, like air leg rock drills, hand held rock drills, etc. integral drill steels can be used for drilling bore hole diameter from 29mm to 41mm usually. Integral drill rods are usually hexagonal with chisel tips or cross tips, the diameter are usually 19mm and 22mm. According to different application, different lengths are available from 600mm to 9600mm usually. With the best hollow drill steels and tungsten carbides, sinodrills integral drill steels will show you very good performance.

More Product Feature

1, light weight (lighter than the old-fashioned drill pipe 45%)

2, footage soon, dust small vertical holes left after drilling cuttings, into a hole clear.

3, card beans quickly and easily connect and save banding material.

4, under separation of body and drilling may be the end, the use of life extended.

5, water-based wet good pass operation

Tapered Drill Rod

1. Supply H22 and H25 tapered drill rod

2. Body Length: 400mm-8000mm

3. Tip Taper a4.8° 7°12°or others

4. Shank Length: 108mm or 159mm

5. Shank Flushing Hole: ø7.5mm-ø8.5mm

102mm Water Well Drill Pipe Used / 3m Dth Drill Pipe 2 7/8

Show Details ︿ Show Less﹀

102mm Water Well Drill Pipe Used / 3m Dth Drill Pipe 2 7/8

Description:-

PART #	Length		Weight
PART #	MM	FT/IN	KG	LB
T38	1220-6095	3’-20’	10.2-53.9	22.5-118.8
T45	1830-6095	6’-20’	21.6-89.4	47.6-197
T51	3050-6095	10’-20’	45.3-92.4	99.8-203.7
R32	2400-6400	7’11’’-21’	15.3-50.3	33.7-110.8
R38	2400-6400	7’11’’-21’	15.3-50.3	33.7-110.8

Tapered drill rods is mainly used in the drilling blasting hole, guardrail hole, mountain reinforcment, anchoring and other engineering holes in mines, quarris, high ways, railways and so on.It has a long service life.and the y’re also subjected to high bending stress,transferring the percussion energy from rock drill to drilling bit and then into the rock.

Taper Drill Rods Price H22 H25 Taper Drill Pipe Rods With Button Bits For Drillings

Show Details ︿ Show Less﹀

Taper Drill Rods Price H22 H25 Taper Drill Pipe Rods With Button Bits For Drillings

Description:-

Taper Drill Rods Price H22 h25 Taper Drill Pipe Rods with Button Bits for Drillings

Our raw material is from 320*480 large-section continuous casting billet, then rolling into 150*150 square billet by drilling holes and inserting seamless pipe, and made of 55SiMnMo. The whole production involves multiple processes, including steel rolling, forging, quenching and tempering, etc. According to the different choices of customers, our company has different quality
products, such as extra-excellent, excellent, ordinary drilling rod, etc. Customers can choose suitable drilling rod according to
different hardness of rock and types of jack hammer. Extra- excellent drilling rod QSAAA and GTIII can be applied to solid rock, III level or above and f≥12 rocks according to Protodikonov’s Hardness Coefficient of Rock. Excellent drilling rod QSAA and G30 is suitable for IV level or above and f≥12 rocks, ordinary drilling rod suitable for IV level or below and f≤8 rocks.

Drill Rod	Length(mm)	Foot	Piece	Weight approx(kg)
H22 Tapered Drill Rod Shank length:108mm Degree:7° Pinhole Dia. of shank:7.5±0.3mm Core hole Dia: ≥5.5mm	1000	3’3’’	100	315
	1200	3’9’’	100	370
	1400	4’6’’	100	435
	1500	4’9’’	100	465
	1600	5’2’’	100	495
	1800	5’9’’	100	555
Note: according to customer’s requirement, we can also offer other raw material as follows: ZK95CrMo, ZK23CrNi3Mo, ZK40SiMnCrNiMo, ZK35SiMnMoV	2000	6’6’’	100	620
	2200	7’2’’	100	680
	2400	7’9’’	100	740
	2500	8’2’’	100	770
	2600	8’5’’	100	800
	2800	9’2’’	100	860
	3000	9’8’’	100	920
	3300	10’8’’	100	1010
	3500	11’5’’	100	1070
	4000	13’1’’	100	1220
	4500	14’8’’	100	1370
	5000	16’’4’’	100	1520
	5500	18’1’’	50	835
	6000	19’7’’	50	915

High Quality Water Well Drilling Rod Drill Pipe With Thread Connector Api Drill Pipe For Mining

Show Details ︿ Show Less﹀

High Quality Water Well Drilling Rod Drill Pipe With Thread Connector Api Drill Pipe For Mining

Description:-

PART #	Length		Weight
PART #	MM	FT/IN	KG	LB
T38	1220-6095	3’-20’	10.2-53.9	22.5-118.8
T45	1830-6095	6’-20’	21.6-89.4	47.6-197
T51	3050-6095	10’-20’	45.3-92.4	99.8-203.7
R32	2400-6400	7’11’’-21’	15.3-50.3	33.7-110.8
R38	2400-6400	7’11’’-21’	15.3-50.3	33.7-110.8

Tapered drill rods is mainly used in the drilling blasting hole, guardrail hole, mountain reinforcment, anchoring and other engineering holes in mines, quarris, high ways, railways and so on.It has a long service life.and the y’re also subjected to high bending stress,transferring the percussion energy from rock drill to drilling bit and then into the rock.

28mn2v Drill Pipe 127mm / 4 1/2 Drill Pipe Manufacturers

Show Details ︿ Show Less﹀

28mn2v Drill Pipe 127mm / 4 1/2 Drill Pipe Manufacturers

Description:-

PART #	Length		Weight
PART #	MM	FT/IN	KG	LB
T38	1220-6095	3’-20’	10.2-53.9	22.5-118.8
T45	1830-6095	6’-20’	21.6-89.4	47.6-197
T51	3050-6095	10’-20’	45.3-92.4	99.8-203.7
R32	2400-6400	7’11’’-21’	15.3-50.3	33.7-110.8
R38	2400-6400	7’11’’-21’	15.3-50.3	33.7-110.8

Tapered drill rods is mainly used in the drilling blasting hole, guardrail hole, mountain reinforcment, anchoring and other engineering holes in mines, quarris, high ways, railways and so on.It has a long service life.and the y’re also subjected to high bending stress,transferring the percussion energy from rock drill to drilling bit and then into the rock.

Grooved Horizontal Directional Drilling Hdd Drill Pipe

Show Details ︿ Show Less﹀

Grooved Horizontal Directional Drilling Hdd Drill Pipe

Description:-

Regular Models of Tricone Bits
Regular Sizes	Regular IADC	API Reg Pin	Make-up Torque(N.m)
3 7/8"(98.4mm)	126/216/637	2 3/8	4100~4700
4 5/8"(117.4mm)	126/216/517/537/637	2 7/8	6100~7500
5 1/4"(133.3mm)	126/216/517/537/637	3 1/2	9500~12200
5 5/8"(142.8mm)	126/216/517/537/637	3 1/2	9500~12200
5 7/8"(149.2mm)	126/216/517/537/637	3 1/2	9500~12200
6"(152.4mm)	126/127/216/517/537/617/637	3 1/2	9500~12200
6 1/4"(158.7mm)	126/127/216/517/537/617/637	3 1/2	9500~12200
6 1/2"(165mm)	126/127/216/517/537/617/637	3 1/2	9500~12200
7 1/2"(190mm)	126/216/517/537	4 1/2	16300~21700
7 5/8"(193mm)	126/216/517/537	4 1/2	16300~21700
7 7/8"(200mm)	126/216/517/537	4 1/2	16300~21700
8 1/2"(215.9mm)	117/127/217/437/517/537/617/637	4 1/2	16300~21700
9 1/2"(241.3mm)	117/127/217/437/517/537/617/637	6 5/8	38000~43400
9 7/8"(250.8mm)	117/127/217/437/517/537/617/637	6 5/8	38000~43400
10 5/8(269.8mm)	117/127/137/217/517/537/617/637	6 5/8	38000~43400
11 5/8(295.3mm)	117/127/137/217/517/537/617/637	6 5/8	38000~43400
12 1/4"(311.1mm)	114/127/217/437/517/537/617/637	6 5/8	38000~43400
13 5/8"(346.0mm)	127/217/517/537/617/637	6 5/8	38000~43400
14 3/4"(374.6mm)	127/217/517/537/617/637	7 5/8	46100~54200
17 1/2"(444.5mm)	114/115/125/215/515/535/615/635	7 5/8	46100~54200
26"(660.4mm)	114/115/125/215/515/535/615	7 5/8	46100~54200

38-113mm Screw Drill Pipe / Auger Pipe / Drill Rod For Clay

Show Details ︿ Show Less﹀

38-113mm Screw Drill Pipe / Auger Pipe / Drill Rod For Clay

Description:-

Application: soft coal bed, and other formation similar to coal bed.

1.The tapered drill rod is used for rock drilling, blasting holes and other drilling works in the quarries, coal mines, traffic and other constructions.
Generally, the lightduty rock drill uses 7 taper or smaller taper angle, the heavyduty rock drill mainly uses 12 taper angle.

2. twist drill pipe/spiral drill pipes specifications

Specifications( mm)			Craft	Connection type with drilling machine
Dia.	Length	Thread type	Craft	Connection type with drilling machine
50-42	500~1500	Taper thread	Friction welding	clamp
63.5-42	500~1500	Taper thread	Friction welding	clamp
63.5-50	500~1500	Taper thread	Friction welding	clamp
73-50	500~1500	Taper thread	Friction welding	clamp
73-63.5	500~1500	Taper thread	Friction welding	clamp
90-63.5	500~1500	Taper thread	Friction welding	Match active drill rod
98-73	500~1500	Hex. Shank	Friction welding	Match active drill rod
110-63.5	500~1500	Taper thread	Friction welding	Match active drill rod
130-63.5	500~1500	Taper thread	Friction welding	Match active drill rod
146-73	500~1500	Taper thread	Friction welding	Match active drill rod

Coal Mine Exploring Twist Drill Rod Auger Spiral Drill Pipe

Show Details ︿ Show Less﹀

Coal Mine Exploring Twist Drill Rod Auger Spiral Drill Pipe

Description:-

When drill super soft high pressure coal seam, diameter 90mm, 113mm, 133mm, 146mm will be recommended. It will be more convenient to lay and install core barrel. This kind of drill rod guarantees high efficiency of drilling work, which stops a gap in China.

Dia.	Length	Thread type	Craft	Connection type with drilling machine
50-42	500~1500	Taper thread	Friction welding	clamp
63.5-42	500~1500	Taper thread	Friction welding	clamp
63.5-50	500~1500	Taper thread	Friction welding	clamp
73-50	500~1500	Taper thread	Friction welding	clamp
73-63.5	500~1500	Taper thread	Friction welding	clamp
90-63.5	500~1500	Taper thread	Friction welding	Match active drill rod
98-73	500~1500	Hex. Shank	Friction welding	Match active drill rod
110-63.5	500~1500	Taper thread	Friction welding	Match active drill rod
130-63.5	500~1500	Taper thread	Friction welding	Match active drill rod
146-73	500~1500	Taper thread	Friction welding	Match active drill rod

Supplier Of Drilling Bits

Show Details ︿ Show Less﹀

Supplier Of Drilling Bits

Geo Tec is representing Smith Bits – a division of Schlumberger U.S.A. since 2007.

They are the front runners in Manufacturing and supplies of drilling bits worldwide and have successfully complimented drilling operations through sophisticated and technically superior products that are duly accredited with API and ISO 9000 certificates.

Geo-Tec interaction is primarily focused with major customers for:

1. To adopt new tender system for purchase of bits

2. Strategic planning of wells

3. Strategic role in handling the situation product

4. Performance problem

Supplier Of Mud Pumps

Show Details ︿ Show Less﹀

Supplier Of Mud Pumps

Geo Tec is representing White Star Pump company in India since 2006. White star pump company are the manufacturer of mud pumps required for Oil and Gas drilling industry.

Our scope of work includes introduction of new technology Quadraplex mud pump to major customers like ONGC, and Oil India and also set up infrastructure for its sale and services. Conduct seminar and presentation with top management of ONGC and Oil India for introduction of new generation of Mud Pumps Quadraplex.

Supplier Of Subsea And Drilling Equipment

Show Details ︿ Show Less﹀

Supplier Of Subsea And Drilling Equipment

Geo Tec is representing Sub- drill, UK, for introducing their premium product Mud bucket to major customers like ONGC, and OIL India.

Sub-drill manufactures and supplies a range of high quality subsea and drilling equipment to the oil and gas industry.
Products include sub-X wellhead and BOP Gaskets, the MS-V3A Mud Bucket, DSV Test stand and side entry sub.

In addition to our proprietary products, we stock products by American block, drill max, Global manufacturing and CLARE.

Sub-drill products are used around the world by clients for who reliability and responsive service are paramount.

External Casing Packer

Show Details ︿ Show Less﹀

External Casing Packer

Continuous Mandrel ECP assemblies are designed with packer elements in 4 Foot (1.22m), 10 Foot (3.05m), and 20 Foot (6.10m) lengths. WORLD OIL TOOLS Tools packer elements soundly conform to irregular or washed-out hole diameters.

World Oil Tools Inc. is a Canadian based manufacturer and supplier of high technology inflatable products to the oil and gas sector.

Staffed with some of the industry's best manufacturing and service personnel, World Oil Tools Inc. can engineer products for the most challenging environments including deep, sour, or extended reach horizontal wells.

The company has its headquarters in Calgary, Alberta, Canada. February, 2012, marks the opening of World Oil's branch office in Bogotá, Colombia.

Air Drilling

Show Details ︿ Show Less﹀

Air Drilling

Geo Tec represents Air drilling. Air Drilling Associates is a world leader in applying air-, mist-, foam-, aerated fluid and other underbalanced techniques for petroleum and geothermal drilling projects.

1. Mist Drilling

Mist Drilling is used when the rock formations begin to produce small amounts of water (10 to 100 bbls per hour) during air drilling operations. Air volumes are increased and a Mist Pump is used to inject small quantities of a solution of water and foaming agent.

2. Foam Drilling

Foam Drilling is especially suitable for drilling large holes in formations that are prone to lost circulation. Foam is generated at the surface by mixing the air from the compressors with a foaming solution from the mist pump.

Tender Services

Show Details ︿ Show Less﹀

Tender Services

Geo Tec International provides tender services to international oil companies helping them conduct business in India.

+ Areas Served − Areas Served

India

United States

Canada

Malaysia

United Kingdom

+ Clients − Clients

ON

ONGC

Ve

Vedanta Oil & Gas

Ho

HongHua

Oi

Oil India Limited

In

Indian oil Corporation Ltd

Re

Reliance Industries Limited

GS

GSPC

Sc

Schlumberger

Jo

John Energy Ltd

GA

GAIL

CA

CAIRN

ES

ESSAR

+ Alliances − Alliances

Ai

Air Drilling Services

Wh

White Star Mud Pumps

Ru

Rubicon Oilfield International

Fr

Frank Henry Equipment

Ji

Jiangsu Huaneng

Sm

Smith Bits Schlumberger Company

Wa

Warrior Rig

Wo

World Oil Tools

+ Projects − Projects

None

None

None

The client is a One of the leading External Casing Packer Manufacturer. Limited knowledge of the Indian required that the client find a partner to support the operations in India. Geo Tec was considered carefully and then contracted to assume responsibility for developing business in India n to detail and their commitment to client success.

Show Details ︿ Show Less﹀

None

The client is a One of the leading External Casing Packer Manufacturer. Limited knowledge of the Indian required that the client find a partner to support the operations in India. Geo Tec was considered carefully and then contracted to assume responsibility for developing business in India n to detail and their commitment to client success.

+ Gallery − Gallery

+ Social Links − Social Links

https://www.facebook.com/GeoTecInternational/

+ Similar Companies − Similar Companies

He

Herrenknecht Vertical Gmbh

Be

Bentec Gmbh Drilling & Oilfield Systems

3e

3esi-Enersight

En

Encod Private Limited

Af

Afcons Infrastructure Limited

Ai

Aimil Ltd.

GP

GP Strategies

Ap

Apache Pipeline Products