Dutest Industrial Est.

CHAIN SLINGS 4 LEGS

MASTER LINK

MASTER LINK ASSEMBLY

CONNECTING LINK

CLEVIS HOOK WITH SAFETY LATCH

CLEVIS SELF LOCKING HOOK

SWIVEL SELF LOCKING HOOK

SHORTEN CLUTCH

CLEVIS GRAB HOOK

GR80 CHAIN

WIRE ROPE

STEEL WIRE ROPE SLINGS

GROMMET SLING

WIRE ROPE CLIP

CHAIN BLOCK

LEVER BLOCK

LOAD BINDER LEVER TYPE

LOAD BINDER RACHET TYPE

WIRE ROPE PULLING HOIST

PUSH TROLLEY

GEARED TROLLEY

HORIZONTAL CLAMP

SNATCH BLOCK

CHAIN BLOCK PLUS

BEAM CLAMP

VERTICAL PLATE LIFT CLAMP

ELECTRIC CHAIN HOIST

LIFTING MAGNET

HAND PALLET TRUCK

PIPE LIFTING CLAMP

TURNBUCKLE

DRUM LIFTER

SCREW PIN BOW SHACKLE

NUT AND BOLT SHACKLE

SCREW PIN D SHACKLE

NUT AND BOLT D SHACKLE

WEBBING SLINGS

ENDLESS ROUND SLINGS

Dutest provides a wide range of lifting accessories and safety equipment through its rigging outlets. All types of lifting equipment including but not limited to Wire Rope Slings and Accessories, Chain Slings, Webbing Slings, Round Slings, Black Slings for the entire industry, Chain Blocks, Lever Hoists, Load Cells, Safety Harness, Eye Bolts, Beam Clamps, Trolleys, Plate Clamps, Magnets and other equipment are supplied by the company.

AP DYNAMOMETERS

ED CRANE SCALE

QUICK CHECK TENSION METERS

QUICK BALANCE TENSION METERS

MECHANICAL FORCE GAUGE

FORCE CONTROL SWITCHES

Dye Penetrant (DP) is a method of detecting surface flaws (cracks) using a chemical ink and a developer, it is mainly used for non-ferrous metal products and profiled surfaces such as gear teeth where other methods are not suitable or practicable.

Magnetic Particle Inspection (MPI) is a well-established method of detecting flaws and cracks in welds made from ferrous material and is often incorporated in proof load and routing overload testing of lifting equipment and plant. For MPI being effective the surface preparation needs to be removed both on the weld to be inspected and a zone to each side of the weld.

Eddy Current (EC) testing detects flaws similar to both MPI and DP testing, with one exception – the surface preparation does not need to be removed for the inspection to be undertaken. This can preserve warranties on coatings while still checking the critical welds. However, if a flaw is found MPI examination or DP is employed to verify the EC findings, we offer this verification at no extra charge.

Thickness Gauging is used to measure internal corrosion, externally. This allows corrosion checks on equipment such as pressure cylinders, tanks and pipe work, and many more. This technique is suitable for checking equipment without having to open or enter the area that requires checking. Again, this can be done without removing the external coating which is very convenient.

A weld is a fusion of metals. In order to have a qualified weld, it has to be inspected by a certified welding inspection personnel. There are various parameters involved with the welding technology and needs a proper monitoring for which our engineers are certified, highly trained, experienced and qualified.

Load testing is a part of Dutest’s normal crane and lifting gear examination and consists of applying a load of suitable proportions to establish the integrity of the item being tested.

Tirak and Minifors are rope hoists manufactured by Tractel France. Dutest is one of the official service centers for these machines.