Drillmec Inc.

Drillmec offers a broad range of waterwell rigs, multipurpose rigs, and equipment for application in water well drilling, well development and geological surveys. With years of experience, Drillmec’s Water Well and Multi-purpose rigs are successfully operating all over the world.

AHEAD (Advanced Hydraulic Electrical Automated Driller) Rigs are an innovative rig system fabricated to satisfy the highest HSE standards and drilling efficiency. AHEAD rigs exploit the advantages of DRILLMEC Hydraulic Rig Series with the capability of working with double (R3) or triple stand (R2).

The main features of AHEAD rigs are:

• Telescopic Mast with double hydraulic piston in tandem for double range 3 or triple range 2 stand

• Fully automated Offline system

• Electric Top Drive

• Fast Moving

Drillmec’w Striker-800™ is an innovative shale drilling rig package. It is widely recognized for maximizing safety, all the while decreasing the rig-up and moving time. It also improves cluster and batch drilling performance with efficiency and reliability.

The main features of Striker-800 inlcudes:

MR 3500 - MR 4000 are the fastest and the smallest rigs of mobile range. These rigs are suitable for shallow wells and workover operations. A truck mounted version can be supplied for easy transportation and compliance with local road rules. On request, frontal pipe handling machine can be provided. The control panel is usually located on the mast side for simple and quick use.

Features

• Integrated skid base to fix mast guy lines and avoid external anchoring
• Band brake or disk brake option for drawworks CE and ATEX certified
• Wide range of substructures including on wheels, telescopic and hydraulic raising
• Working floor adjustable with foldable walkway and stairway
• All rig components can be designed for operations range from -45°C up to +55°C (heat cooling / winterization)
• Sound proof shelter for engine upon request
• Main drum and sand reel
• Crown saver system (rig floor saver on request)

Source : http://www.drillmec.com/en/p/mobile-rigs/

MR 5000 - MR 6000 are fast workover rigs. Special outriggers are installed on rig’s rear side and hydraulically pulled out/ in, where mast guy lines are connected. 
Therefore no ramp, t-base or concrete works are necessary. All the rigs are designed for power swivel installation. The drawwork’s cooling system is located onboard whereas the swivel power unit upon request. The working floor is adjustable in height and foldable on the rear side of the rig’s frame. Sand reel can be used as a swabbing unit.

Features

• Integrated skid base to fix mast guy lines and avoid external anchoring
• Band brake or disk brake option for drawworks CE and ATEX certified
• Wide range of substructures including on wheels, telescopic and hydraulic raising
• Working floor adjustable with foldable walkway and stairway
• All rig components can be designed for operations range from -45°C up to +55°C (heat cooling / winterization)
• Sound proof shelter for engine upon request
• Main drum and sand reel
• Crown saver system (rig floor saver on request)

Source : http://www.drillmec.com/en/p/mobile-rigs/

DRILLMEC offers a complete range of Triplex Mud Pumps from 600 hp to 2400 hp diesel or electric AC – DC powered both 5000 and 7500 psi rated. 

All the mud pumps can be mounted on an oilfield skid or trailerized in order to favour fast moves.

Before being installed all the single parts are checked and a quality code is assigned. After the final assembly
every mud pump is severely tested in our test area.

DRILLMEC’s GD Series is the new generation of Gear Driven Triplex Mud Pumps in the ranging from 1600 to 2400 hp for both onshore and offshore drilling operations.

The direct gear driven transmission between the AC motor and the cranshaft together with the top mounted configuration gives to the GD Series Mud Pumps a very compact design despite their high volume and high pressure capabilies.

GD Series Triplex Mud Pumps are equipped with P-Quip fast release system for valve cover, rod and liner.
The fluid end is suitable for a maximum working pressure of 7500 psi.

Sources:- http://www.drillmec.com/en/p/triplex-mud-pumps/

Drillmec manufactures a full range of hydraulic top drives. Drillmec HTDseries top drives can be fitted to almost any rig in order to increase the performance and help in operations such as directional or horizontaldrilling. Drillmec designs top drive rails and torque tube starting from drawings of the customer rig or from data collected by

our technicians directly on the rig field. The torque tube provide the connection between the new HTD top drive and the existing rig. The HTD top drive is supplied with an independent hydraulic power pack and controls and with a transportation cradle designed to hold it and help in moving.

Source:- http://www.drillmec.com/en/p/top-drives/

In the oil & gas industry top drive technology is used to increase performance and safety; from Drillmec solid experience in manufacturing hydraulic pipe handling and top drives, we introduce the ETD Series. The Drillmec Electric Top Drive is designed as transportable as well as permanent installed unit for deep drilling rigs with different mast types. The System is powered by an AC motor. The ETD Series is controlled by a separate control panel.

The standard Top Drive version includes the following items:

• Hanger assembly with integrated Counterbalance cylinders
• Standard washpipe
• Link-tilt-system with position monitoring designed for high impacts
• Remote-controlled and manual IBOP
• Backup Clamp to make up and break the Top Drive drill pipe connection
• Guide rail system inducing the torque within the mast
• Electrical service loop
• Suitable for installation on any kind of mast and derrick

Source :-http://www.drillmec.com/en/p/top-drives/