Delta Corporation

Tubing hangers are installed in the top bowl of a tubing head. Tubing hangers both suspend the
tubing and provide a primary annulus seal between the tubing and production casing.

Manual hanger, Self Energized Hanger, Hanger with Control-lines, EFT Hanger and Dual Hanger

The tubing head adapter provides a transition between the tubing head and the Christmas tree. 

Normal Adapter Flange, Adapter with Control-lines, 3A- Single Piece Adapter and 3B- 2 Pieces Adapter.

Composite Tree

Single Block Tree

Dual Block Trees

Tree Caps are installed on the top of Christmas trees for quick access to the tubing bore-via Tester or Lubricator Adapter for bottom hole testing, installing back-pressure valves etc. Bottom Hole Test Adapter allows a flexible means of entry into the tubing bore.

OTIS Type Tree Cap

The Delta gate valve has been proven in critical oil filed services throughout the world. 

C-Model Gate Valve and TC Model Gate Valve

Delta Hydraulic Actuator (DHAV) is designed to be used in conjunction with Delta valve bonnets to provide open and close control for major brands of API 6A through conduit reverse acting gate valves fitted to oil and gas wellheads and production flow lines.

The solar panel uses the sunlight energy to compress enough air pressure to operate the pneumatic SSV. This technique allows the equipment to be used in an unattended or isolated location. 

Delta gate valves offer the ultimate in dependable service for steam, air, gas, oil vapor and high pressure installations. All have straight-through ports to assure minimum turbulence, erosion and resistance to flow. 

Delta Globe Valves are highly efficient for services requiring frequent operations and throttling when pressure drop across the valve is about 20% of inlet pressure.

Check valves are automatically actuated. They are opened and sustained in the open position by the force of velocity pressure and closed by the force of gravity. Seating load and resultant tightness is dependent upon back pressure.

Delta Ball Valves are manufactured to industry FIRE SAFE standards to ensure safety in the event of fire. If failure of the primary seal occurs, the ball contacts the secondary (metal) sealing surface to provide an emergency positive seal.