NewAge Fire Protection Industries Pvt. Ltd.

It is an IS 636 Type B hose. It has an Internal Rubber lining combined with closely woven polyster fibre. It also has a smooth inner lining surface with very low friction loss.It is ribbed for Hose protection and easy handling.

Its body is made up of Grey Cast Iron. Its inlet is Flanged and outlet is Gun Metal Threaded Outlet. Its working pressure is 150 PSI, seat test is 240 PSI and Body Test is 325 PSI. 

Its body is made up of Aluminium. Its inlet is Threaded BSRT/ (F) Inst and outlet is Female Instantaneous as per BS 336. Its working pressure is 150 PSI and Body Test is 325 PSI. 

Its body is 2 way C S Fabricated. Its inlet is 4” Flanged and outlet is 2-2 ½” flanged with Landing Valves.Its working pressure is 150 Psi and test pressure is 325 PSI. 

Body Gun Metal or Aluminium Alloy or Cast Iron Inlet Two Instantaneous with NRV Outlet 4” Flanged Working Pressure 150 PSI Test Pressure 325 PSI.

Body Gun Metal or Aluminium Alloy or Cast Iron Inlet Three Instantaneous with NRV Outlet 6” Flanged Working Pressure 150 PSI Test Pressure 325 PSI.

The Angle Hose Valve is fabricated in accordance with UL 668 Standard for Hose Valves for fire - protection service. The Hose valve is provided with standard taper pipe threads conform to ANSI B2.1 installation of the hose valve is achieved with readily available field tools, prior to installation, use pipe joint compound or PTFE tape apply on male threads, tighten the hose valve is aligned accordingly to requirement.

It is ISI 5290 Type A marked hose. Sizes available are:-i) 1 ½” (38mm), ii) 2 ½”(63mm), & iii)3”. Its inlet is Flanged or BSPT/NPT threaded. Its outlet is Female instantaneous or male BSPT/NPT threaded. 

Sizes available are i)1 ½” and ii)2 ½”.The inlet for these sizes is as per ANSI and PN16. Its inlet is Flanged or BSP/NPT threaded. Its outlet is Female instantaneous or male BSPT/NPT threaded. 

Body Aluminium or Gun metal Working Pressure 150 PSI Test Pressure 325 PSI Type Rockerlung or Pintype.

As Per Bs 336, IS : 902 Body Gun metal & Aluminium Connection Threads BSRT Working Pressure 150 PSI Test Pressure 325 PSI.

Body Gun metal or Aluminium Alloy Size 2 ½” ( 63 mm) 1 ½ (38 mm) Working Pressure 150 PSI Test Pressure 325 PSI.

High pressure braided rubber hose as per IS: 444 Type II / PVC Specification.

It is specially designed to give low back pressure. It has a constant Gallonage Nozzle. It has a straight stream to wide fog and flush without shut off.Its moulded rubber bumper with flexible fog teeth creates thick fog pattern. 

It is a specially designed Dual Pressure Nozzle which gives low back pressure. In emergency mode the nozzle maintains same performance. Its construction is Durable Light Hard Anodized.Its sliding valves allow turbulence free flow. 

It is standpost mounted and hot dipped galvanized. It has Gun Metal Swivel joint with S.S ball bearings and has a flanged inlet.It has Horizontal 360 degree & vertica +90 degree & -45 degree rotation. Its maximum Working Pressure is 150 PSI. 

The material used for construction of these pumps is Aluminium Alloy.The working pressure handled is Max-145 PSI and Min-72 PSI. The feed water inlet is 2 ½” instantaneous and the maximum suction depth is 10 meters. 

The adjustability feature makes it possible to vary the angle of throw of water for effective operation. These pumps are constructed using Aluminium Alloy.The working pressure handled is max-10 bar and Min-5 bar.