Aertssen

About in 2013 AMS was contacted for the tailing of 336 Tons of Oxyreactor on Qatar Venyl Site. For this operation detailed lifting plans have been outlined and our Terex CC2800-1 with 54m main boom was mobilized. A Terex AC500-2 was used as tailing crane.

Construction of a facility on Zirku Island to separate gas from crude oil collected in the SARB and Umm Al Lulu oil fields. The oil and gas processing facility in Zirku Island has a daily capacity of 200,000 barrels of oil, equivalent to 160,000 200-liter drums, and 35 million cubic feet of gas.For this project, AMS shipped a 145 mobile Crane and a 150 ton Crawler Crane to Zirku Island.For another client AMS is assisting the construction of a 7th Crude Oil Storage Tank with a total capacity of 1million barrels.

When Denholm Yam needed to lift two steel jackets from an oil rig, it was up to AMS that they turned for help, and with good reason. Before being placed on barges, the steel jackets need to be carefully positioned, with 261 tons of apiece. The AMS solution was to use four cranes: two main cranes with a 400 ton capacity and two 280 tons capacity cranes to help control the jackets while they were being moved. All four cranes needed to be coordinated, since the movement of one crane would inevitably affect the movement of the others. The process was facilitated by the AMS extensive planning and 3D drawings demonstrating how the operation should proceed. Conducted with minute precision and the utmost care, The cranes should work in tandem, although cranes were involved. The cranes and counterweights needed to be aligned at all times. And once again careful preparation, combined with deep engineering, extensive experience and raw know-how enabled.

Shutdowns and turnarounds sometimes require a limited amount of lifting and transport activities in a short-time frame and on a restricted surface area.Furthermore, the situation requires extensive discussions and communication between the parties involved. With such operations, literally every minute counts, because the factory has a lot of potential, without losing sight of safety aspects. Aertssen is happy to take on this coordination, so that you can look forward to the next one.The Adma refinery on Das Island was temporarily shut down to allow for an expansion project. Meanwhile, numerous offshore lifting projects needed to be outsourced. Given its ability to plan, engineer, provide equipment and perform such heavy lifts, AMS was the perfect partner in the construction and construction industry.

AMS assisted in the expansion of UAE's largest downstream facility to double its capacity to more than 800,000 barrels a day. The facility started commissioning in 2015 and during the expansion AMS interest out of various cranes for construction of jetty; general construction works; erection of storage tanks, boilers & pressure tanks. We installed 12 major components weighing up to 213ton. The largest item was 62m tall.

AMS has been chosen as a preferred partner to assist with numerous lifting activities during expansion of the refinery. Numerous offshore lifting projects supporting construction of new facilities on the island, to increase offshore processing facilities, including land reclamation. AMS assisted with providing lifting plans, ground bearing studies, method statement and risk assessments. In total 7 cranes (mobile and crawler cranes) were shipped to Das Island.

Assembly & installation of Silos; Hire of multiple mobile Cranes with operator and CNIA Gate pass for Heavy Lift Services; manipulation of storage tanks at lump sum price.

AMS was contacted to execute the vibro hammering activities to prepare the Quay wall. For this project different mobile cranes between 40 and 400Ton were mobilized.